+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: Oscar 1.3.0 Pressure Min/Max (/Thread-Oscar-1-3-0-Pressure-Min-Max)
Oscar 1.3.0 Pressure Min/Max - S. Manz - 10-27-2021
So I just noticed that there's a new Pressure Min and Pressure Max in Oscar 1.3.0, which didn't exist in previous version.
Does anyone know what it means and why mine shows Zero for both?
[attachment=36684]
RE: Oscar 1.3.0 Pressure Min/Max - pholynyk - 10-27-2021
The ResMed machines keep separate settings for each mode they support, so It looks like the wrong setting was chosen for ASV mode. What does it display just below the orange bar with your AHI? Is that correct?
I think it should display IPAP Min and Max for ASV mode, but there is some confusion internally between IPAP and Pressure, and they have separate fields internally.
Please make a zip of your SD card and upload it to Gideon's Dropbox: https://www.dropbox.com/request/6VeFzBXa4qZ37EgphL5b
Also please tell my what your settings are, so that I can find the right fields in the STR.edf file.
RE: Oscar 1.3.0 Pressure Min/Max - S. Manz - 10-27-2021
No problem with the previous version.
My settings are already displayed (and the same are displayed just above AHI). EPAP 4 PS Min 5 and PS Max 13 the only 3 parameters that you can set for Resmed Aircurve 10 in ASV Pap mode.
There are no other Min/Max "Pressure" settings .
The machine already calculates IPAP Max by adding EPAP and PS Max.(in this case 17)
That said, I note that my "Pressure" graph never drops below about 9.6 and of course flats out at just below 17 (about 16.8)
Maybe in this version of Oscar they wanted to display this "Pressure" min/max but there's a bug?
RE: Oscar 1.3.0 Pressure Min/Max - sheepless - 10-27-2021
I just updated to 1.3.0. currently using resmed asv in asv mode. my chart does not show min and max in the two top lines under machine settings like S.Manz's.
RE: Oscar 1.3.0 Pressure Min/Max - S. Manz - 10-27-2021
(10-27-2021, 08:54 PM)sheepless Wrote: I just updated to 1.3.0. currently using resmed asv in asv mode. my chart does not show min and max in the two top lines under machine settings like S.Manz's.
Plot thickens
Its actually weird. I updated mine a few days ago but today's chart (last night's sleep) is the only one that shows this min and max pressure thing.
Maybe yours will show up in a few days
