+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Air fit N30 ? (/Thread-Air-fit-N30)
Air fit N30 ? - Nightynite - 10-27-2021
Is it possible to have a quick disconnect between the Airfit 30 hose end and the slimline hose.
I know the hose is permanently attached on the Airfit 30, I just wanted a quick disconnect between the two hoses.
There two different diameters also.
RE: Air fit N30 ? - Sleeprider - 10-27-2021
The Airfit N30 mask is attached to a short tube that connects to the CPAP tube. If you need to disconnect, it is that joint you should disconnect. Unlike full face masks, it should be easy to simply slip off the mask, do what needs to be done and replace the mask for sleep. Why would you need a quick disconnect? That's not easy enough?
RE: Air fit N30 ? - Nightynite - 10-27-2021
Because the mask nose piece goes on according to the small black L & R letters. I will never be able to see those in the dark.
Disconnecting the 2 hoses by wiggling them back in forth will eventually cause one or the other to fail I think.
An insert, like on the Dreamwear would be perfect. That’s probably why they put it on the Dreamwear.
RE: Air fit N30 ? - adrmannyc - 10-28-2021
(10-27-2021, 05:46 PM)Nightynite Wrote: Because the mask nose piece goes on according to the small black L & R letters. I will never be able to see those in the dark.
The length adjustment cinch for the headgear will be on either the left or right side depending on how you have it installed. For mine it's on the right. Just locate that by touch and orient the N30 appropriately.