+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Cleaning - What is really Needed? (/Thread-Cleaning-What-is-really-Needed)
Cleaning - What is really Needed? - mcman56 - 12-12-2021
I have been using CPAP with nose pillows for 3 months and have been mostly washing them daily. The hose, pillow mount and water reservoir are washed weekly. I just saw that I should also be washing the pillow mount/ vent part daily. However, I never see any sign of dirt/ contamination of any kind even when missing a couple of days. Everything always looks immaculate even before washing so I feel like my schedule is quite excessive. Are there any recommendations on what is really needed/ adequate to keep these components clean? What do others do?
I do live in a very dry climate, Sacramento CA, and suspect the result could be much different in a humid climate.
On that same note, I have also seen a recommendation to replace the hose and mask every 3 months. What is the reason for that? All of my components look perfect.
RE: Cleaning - What is really Needed? - Sleeprider - 12-12-2021
Your schedule is fine, and more aggressive than mine. I spill and wipe the humidifier chamber daily, clean weekly. Mask cushion 2-days, mask frame and tubing never, I just replace the mask every 6 months and have never had an issue. Obviously we don't share this equipment and if a hygiene or health problem were apparent I would deal with it.
RE: Cleaning - What is really Needed? - Big Guy - 12-12-2021
Don't overthink the need for frequent cleaning. My hose is original to my machine, and I've been uoing it now for over three years. Same goes for the water reservoir.
I quit using distilled water years ago. It's just tap water now and it's fine. I do empty the reservoir each morning. My mask gets wiped down with Clorox Anti-bacterial Wet Wipes every couple of days or so.
I'm using an AirFit F30 and it's so easy to clean. About every two weeks or so, my headgear, mask, and cushion, gets a good scrubbing in Hot water and dawn dish soap. If I think of it, I'll toss the water tank in as well.
I use white vinegar in the water tank to rid it of any mineral build-up that might occur. A few minutes of soaking and it's all gone, clean as new!
The hose itself gets cleaned every couple of months. Hot water and Dawn dish soap. I never experience any rain-out.
I was in the military. I'm Germ-Proof.
RE: Cleaning - What is really Needed? - Melman - 12-12-2021
(12-12-2021, 11:24 AM)mcman56 Wrote: On that same note, I have also seen a recommendation to replace the hose and mask every 3 months. What is the reason for that? All of my components look perfect.There may be several reasons:
The suppliers make more profits when you replace components per their schedule.
Arbitrary recommendation
Concern for liability if someone uses a component t0o long without cleaning and gets some type of respiratory infection (highly unlikely)
Most here change components much less frequently, like when they fail. I've been using the same hose for 4 years and won't replace it until it fails in some way.
The recommended frequency for full face mask cushions is monthly. I used the last one for two years before I replaced it. I use a reservoir until it develops leaks.
I've been using my original F20 mask frame for over 4 years. I replaced the headgear after 3 years when the Velcro began to fail. I recommend keeping at least one spare of everything and saving your money. I do replace filters every month or two which is close to the recommended schedule.
RE: Cleaning - What is really Needed? - speed3914 - 12-12-2021
Wow I could never keep up with that lol. I use distilled water in my humidifier and empty it each day allowing it to air dry. I rinse the hose and mask tubing with dawn and hot water every two weeks. I change my filters every two weeks as well.
RE: Cleaning - What is really Needed? - mcman56 - 12-12-2021
What filters so you change? My system only has this small coarse air intake filter that always looks perfect. It looks like it is there to make sure a bug does not get sucked in.
RE: Cleaning - What is really Needed? - Big Guy - 12-12-2021
(12-12-2021, 07:48 PM)mcman56 Wrote: What filters so you change? My system only has this small coarse air intake filter that always looks perfect. It looks like it is there to make sure a bug does not get sucked in.
I feel the same as you do. It's there to protect the machine, not the user.
The filter in my ResMed 10 AutoSet rarely gets dirty. If it should, I simply wash and dry it and it's good to go.
RE: Cleaning - What is really Needed? - LindanHotAir - 12-12-2021
It’s a good idea to have a spare hose, mask, humidifier chamber, filters, and cushion. Most of the recommended replacement times are based on what insurance will pay for. Order a replacement when you start to use your spare. Those items generally last much longer than the minimum replacement recommendations. Memory foam cushions are an exception as they have an average 30 day lifespan. Pollen filters are good for 2 to 4 weeks.
RE: Cleaning - What is really Needed? - S. Manz - 12-12-2021
It is important to note that no manufacturer recommends cleaning of the INSIDE of the machine itself and with very good reasons.
The machine motor and blow chambers are protected with fine filters and the machine's inside cavity is in positive pressure state while it is working, so the likelihood of the insides of the machine getting contaminated , is very low.
The mask, tube and water containers can be cleaned using warm water and mild soap dish every other night before use (or every day if you are really fussy).
!!!!!!!!!!!!!>>>>>>>>>>>>>>THERE IS NO NEED FOR OZONE AND ULTRAVIOLET CLEANERS<<<<<<<<<<<<<!!!!!!!!!!!!
If you are considering to buy expensive cleaning equipment, spend the money on something more important because you are wasting your money on these so called cleaners and if you happen to have a Philips product, you will run the risk of destroying the sound abating foam inside and seriously hurt your health.
RE: Cleaning - What is really Needed? - Moriarty - 01-03-2022
(12-12-2021, 11:24 AM)mcman56 Wrote: On that same note, I have also seen a recommendation to replace the hose and mask every 3 months. What is the reason for that? All of my components look perfect.
In my experience (>6 years) that is unnecessary provided the equipment is cleaned regularly. My current hose is 5 years old and the mask 3 years old.
Masks need to be cleaned often but tend to last well provided the seals are not damaged by sharp fingernails ets.
The only issue with the hose that I can see (apart from physically breaking it) is mould if the user runs high humidity and does not disconnect the hose from the tank to allow it to air out when not using it.
Headgear can be an issue with some masks. I had a Pilaro mask where the elastic straps used to perish and lose tension over a few months.