+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: Resmed S10 and Wellue data tracks not in sync (/Thread-Resmed-S10-and-Wellue-data-tracks-not-in-sync)
Resmed S10 and Wellue data tracks not in sync - g1ant - 02-01-2022
The tracks from my S10 are an hour off sync with my o2 data from my SleepU.
Is there an easy way of fixing this within Oscar or do I have to start fiddling with time zones in the S10?
It’s the S10 that’s an hour in front of where it should be.
RE: Resmed S10 and Wellue data tracks not in sync - kappa - 02-01-2022
You can shift the CPAP data using OSCAR Preferences | CPAP | CPAP Clock Drift.
RE: Resmed S10 and Wellue data tracks not in sync - g1ant - 02-01-2022
Perfect. Thank you.
RE: Resmed S10 and Wellue data tracks not in sync - Crimson Nape - 02-01-2022
Look at this way, come March 13th, your time will be correct. If you don't want to reset the CPAP's time, and you are running OSCAR 1.3.0 or newer, you can rename the Wellue data file to the time (and date, if needed) you want it to start in OSCAR. If you decide on trying this on a day when you have already imported the SpO2 data, you need to purge it and then reimport the renamed file. Here are the steps to purge the data: Data > Advanced > Purge Oximetry Data > Current Days Sidenote; Don't ask why it says "Days" when you can only purge the current one.
- Red