Apnea Board Forum - CPAP | Sleep Apnea
Changing modes on machine inadvertently? - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Changing modes on machine inadvertently? (/Thread-Changing-modes-on-machine-inadvertently)



Changing modes on machine inadvertently? - Tom in RI - 06-24-2013

I have been using Sleepyhead since becoming aware of it here a little bit back. Over the weekend I neglected to put my card back into my machine for a couple of days, instead it stayed in my computer. This morning I slipped the card back into my Bi-PAP machine and it updated. When I put it back into my computer Sleepyhead showed limited data for the last two days and it now shows the mode as Auto C Flex x3, it had been Bi-Level Bi Flex x3. Is this a change I could have caused fumbling with turning the machine on?


RE: Changing modes on machine inadvertently? - zonk - 06-24-2013

If not mistaken if the SD card been let out while using the machine ... detailed data with graphs is lost and cannot be retrieved

Detailed data written directly on the card (not stored in the machine)






RE: Changing modes on machine inadvertently? - Tom in RI - 06-26-2013

I brought my machine into my DME supplier this morning. They successfully downloaded info from my SD card. They said everything was fine with the machine and the report. I brought the machine home and checked to see what, if anything, would come up with Sleepyhead. Nothing, as far as the program indicates, I haven't used the machine since 6/22. Not quite sure what to do yet. I may try uninstalling and reinstalling Sleepyhead.