+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: Changing the time in Oscar reports. (/Thread-Changing-the-time-in-Oscar-reports)
Changing the time in Oscar reports. - mamazipp - 03-12-2022
I updated the new Oscar but now the time clock on the reports is showing the time in afternoon hours on the 24 hour clock. How do I reset this? Appreciate help.
RE: Changing the time in Oscar reports. - Crimson Nape - 03-12-2022
OSCAR is obtaining its time from your CPAP. You will need to set your CPAP's time, located in the clinician menu.
RE: Changing the time in Oscar reports. - SuperSleeper - 03-12-2022
For instructions on how to get into the Clinician Menu in an AirSense 10 machine, see this page:
https://www.apneaboard.com/resmed-airsense-10-aircurve-10-setup-info
Alternatively, you can ask for a Clinician Manual for your machine via email by following the directions here:
https://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual#ASK
Once in the Clinician Menu mode, see here for how to set the time:
http://www.apneaboard.com/wiki/index.php/Setting_the_clock#Instructions_for_A10_series_machines:
RE: Changing the time in Oscar reports. - GuyScharf - 03-13-2022
If I understand your question correctly, your issue is that OSCAR is showing times with a 24-hour clock and you would like to see a 12-hour clock format. I.e., you would like to see "9:00 pm" instead of "21:00." As far as I know, OSCAR has never displayed times in a 12-hour format. Using a 12-hour format requires allowing additional space on the screen for AM or PM.
If you have seen a 12-hour clock displayed before, which version were you using then?