+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] REMstar Ultra Fine Filter and A Fib (/Thread-Equipment-REMstar-Ultra-Fine-Filter-and-A-Fib)
REMstar Ultra Fine Filter and A Fib - bw54 - 06-28-2013
My REMstar Plus is 16 months old and works well. However, I have become aware of myself waking up after about 4 to 5 hours of sleep and having to lift my nasal mask up a few times during sleep almost like trying to get a good breath of air. My hose is not tangled. I have just recognized that this has been going on for quite some time. I change the ultra fine filter monthly or when dirty and wash the foam filter often. I have taken the ultra fine filter out for now and the machine seems to "breathe" better. I was just diagnosed with A Fib and sleep apnea could be one of the causes. Any ideas as to what may be going on with machine?
RE: REMstar Ultra Fine Filter and A Fib - trish6hundred - 06-28-2013
Hi bw54,
WELCOME! to the forum.!
Hang in there for answers to your questions and best of luck.
RE: REMstar Ultra Fine Filter and A Fib - zonk - 06-28-2013
(06-28-2013, 09:48 AM)bw54 Wrote: Any ideas as to what may be going on with machine?REMstar Plus is not not data capable machine (no efficacy data ... AHI, leak, waveform data)
your doctor could use this information to assess how well your therapy is working and make changes based on the data
PRS1 user manual: Installing the Air Filters
1. If you are using the white disposable ultra-fine filter, insert it into the filter area first, mesh-side facing in, towards the device.
2. Insert the required gray foam filter into the filter area after the ultra-fine filter.
Note: If you are not using the white disposable filter, simply insert the gray foam filter into the filter are