Apnea Board Forum - CPAP | Sleep Apnea
[Equipment] ResMed Air Autoset 10 not showing correct hours of use - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] ResMed Air Autoset 10 not showing correct hours of use (/Thread-Equipment-ResMed-Air-Autoset-10-not-showing-correct-hours-of-use)



ResMed Air Autoset 10 not showing correct hours of use - cloudberry - 05-14-2022

Hello. 
New member, thanks for admitting me to group. 
I have a resmedair10 autotset machine that for the last week 
has stopped recording hours used correctly.  One morning showed only 2 hours use and I had slept 7
One time I slept 6 hours and it only showed 2.55 . one time slept 5 and it shows and it showed only 3.5 The face icons on the machine display shows no leaks and are smiling .
When I wake up the machine is still blowing air per usual and my wife says she does not think it stops or anything during the night. 
I called the VA and they have not heard of this issue before . No new machines available due to "Supply Chain" issues for a month or more. I really like this machine 
and do not wanna use a downgraded loaner . Said they will call me back next week with more advice from a tech but I have a feeling I will just have to wait it out. I have an older S8  with an inop heat pad they said I can use if I do not feel comfortable using the 10 but other than not logging hours correctly the ResMed 10 autoset works fine. 
Any advice why this is ResMed 10 autoset is doing this or how to fix it ?


RE: ResMed Air Autoset 10 not showing correct hours of use - pholynyk - 05-14-2022

There are two likely possibilities here. The Autoset keeps track of sleeping hours from noon to noon, according to its clock. If you sleep during the night, it may be that the clock is not set correctly. If you sleep in the morning, and sleep past noon, only the hours past noon will show up after you wake up.

The fix, in either case, involves going into the Clinician's Menu and setting the clock and calendar, either to the correct time (if you sleep normal hours), or offset so that the machine's noon falls outside your sleeping hours.

You can find instructions about the Clinician's Menu if you click on the 'CPAP Setup Manuals' in the black menu bar above. If you aren't comfortable accessing the Menu, your tech guy can guide you through it.

The machine is keeping track of all your hours, and they will be copied to an SD card which can be read by your DME or by the OSCAR program which you can download for free from the black menu bar at the top.


RE: ResMed Air Autoset 10 not showing correct hours of use - cloudberry - 05-14-2022

Ok. will try to get the sleep peeps to check on this for me. Thx.


RE: ResMed Air Autoset 10 not showing correct hours of use - cloudberry - 05-16-2022

Thx for your reply. They called and walked me through the clinical access to check the time. Was ok. They asked if I was using a heated tube. I do . Official resmed one that I bought with my own funds. They said sometimes the tube can cause problems with the data collection. On the list for a new machine but in the meantime going back to an old skool hose and see what happens.