+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Need help - nothing seems to work (/Thread-Need-help-nothing-seems-to-work)
Need help - nothing seems to work - Spybear - 06-13-2022
Hello,
My prescription from my sleep doctor still has me waking up feeling and looking terrible. I’ve had my ResMed Aircurve 10 for the last 6 months. I bought it to replace my Phillips machine from the foam issue. The settings that were recommended to me by my doctor are the following:
AutoASV
Min EPAP 5
Max EPAP 15
Min PS 0
Max PS 15
I’ve since switched it to the following.
AutoASV
Min EPAP 7
Max EPAP 15
Max PS 4
Max PS 15
What software do I need to be downloading to take a look under the hood with the SD card? The machine claims I have 0 AHI but like I mentioned, I still wake up feeling terrible and looking like I hadn’t slept. No matter what settings I switch it to, nothing seems to work. I’m at my wits end. My mask is an F30 with a heated tube and humidifier. Any recommendations would be very much appreciated.
RE: Need help - nothing seems to work - Melman - 06-13-2022
I'm assuming you have a resmend machine. You want free OSCAR software from the link at the top of this page. You can post your daily data here. See the links below for instruction.
RE: Need help - nothing seems to work - Spybear - 06-13-2022
It will not allow me to upload the pdf from Oscar. Any tips as to why? It definitely is within the sizing limits.
RE: Need help - nothing seems to work - Gideon - 06-13-2022
We really prefer to see the screenshot vs the PDF
RE: Need help - nothing seems to work - Spybear - 06-13-2022
Hopefully this works
RE: Need help - nothing seems to work - multicast - 06-14-2022
First step is to reduce your leaks.