air leakshi, I write from Italy. I use a resmed airsense 10 cpap at pressure 13 and a - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: air leakshi, I write from Italy. I use a resmed airsense 10 cpap at pressure 13 and a (/Thread-air-leakshi-I-write-from-Italy-I-use-a-resmed-airsense-10-cpap-at-pressure-13-and-a) |
air leakshi, I write from Italy. I use a resmed airsense 10 cpap at pressure 13 and a - papaste - 01-22-2023 ciao, scrivo dall'Italia. Uso un resmed airsense 10 cpap a pressione 13 e una maschera nasale airfit n 20. il display del cpap mi mostra 26 litri di perdite d'aria, è normale o è troppo?? grazie Translated: hi, I write from Italy. I use a resmed airsense 10 cpap at pressure 13 and an airfit nasal mask n 20. the cpap display shows me 26 liters of air leakage, is this normal or is it too much?? thank you RE: air leakshi, I write from Italy. I use a resmed airsense 10 cpap at pressure 13 and a - Crimson Nape - 01-24-2023 The maximum leakage that a Resmed can have, before it effects your therapy and event recording, is 24L. Resmed CPAPs report this value after removing the mask's designed leakage value. Ideally, you should strive to have a 0 (zero) leak value. - Red RE: air leakshi, I write from Italy. I use a resmed airsense 10 cpap at pressure 13 and a - papaste - 01-28-2023 hello and thank you, I tried to replace the nasal mask, but nothing, every day in the cpap display I always see 26 liters of air! yet I don't think there are any leaks, also because the smiley or smaile is always green on the resmed display!! RE: air leakshi, I write from Italy. I use a resmed airsense 10 cpap at pressure 13 and a - burgess4321 - 02-02-2023 Hi, try it with a strap that usually fixes most of the leaks. |