Apnea Board Forum - CPAP | Sleep Apnea
ResScan Data Download Problem - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: ResScan Data Download Problem (/Thread-ResScan-Data-Download-Problem)

Pages: 1 2 3

ResScan Data Download Problem - mjholdeman - 03-14-2012

Howdy! I'm new to the board but not to CPAP. After 5 years on CPAP I just switched to a ResMed S9 AutoSet, partially due to the software. Well, I downloaded the ResScan software (3.16) but I can't get it to see my SD card and download the data.

I've tried uninstalling/reinstalling and making sure I didn't install the ResScan drivers but no luck. I'm running Windows 7 64 bit. I also get a pop-up window whenever I run ResScan with the title "_ASSERTE:" and the text of "intf!=0 @ C:\PROGRA~1\Borland\CBUILD~1\Bin\..\include\vcl\UtilCls.h/2868
Press [Y]es to terminate, [N]o to continue and [C]ancel to Debug"
It doesn't seem to matter what I choose, ResScan starts but I can't see the SD card.

I thought I saw somewhere that an older version of ResScan might work for me but I don't know where to get it.

Can anyone help me out?

Thanks



RE: ResScan Data Download Problem - SuperSleeper - 03-14-2012

(03-14-2012, 09:38 PM)mjholdeman Wrote: I thought I saw somewhere that an older version of ResScan might work for me but I don't know where to get it.

Can anyone help me out?

Thanks

Hi mjholdeman, welcome!

All you have to do to download previous versions of ResScan is to change the 3.16 at the end of the download link to whatever version you want (like 3.14 for instance). It will take you to the download site for that particular version... the link stays the same for each version except for the 14 changing to 16 at the end of the URL.

Coffee

RE: ResScan Data Download - jacquesduff - 03-15-2012

Can someone give me the download link for Resscan software, I have the same problem with V 3.16. cannot see the SD card or USB despite installing drivers

RE: ResScan Data Download Problem - Dreamcatcher - 03-15-2012

I hope people are aware that they must back-up their data before installing a newer version of ResScan. I just updated mine from 3.14 - 3.16. and all my data was scrubbed, but as I use a data card I still had all my data on there.

RE: ResScan Data Download - SuperSleeper - 03-15-2012

(03-15-2012, 06:30 AM)jacquesduff Wrote: Can someone give me the download link for Resscan software, I have the same problem with V 3.16. cannot see the SD card or USB despite installing drivers

We can't post the link publicly, (because it's one of ResMed's "private links" - primarily for Clinicians and we don't want to risk them taking down the link-- preventing us "regular folk" from using it), but directions for how to obtain the free ResScan software are in our Private Files & Links forum: (CLICK HERE)

You'll need to be logged into your Apnea Board account. Look for the ResScan thread in that forum, follow directions and you'll get the link sent to you within 5 minutes, even if you've already requested it via this method before.



RE: ResScan Data Download - Steven - 03-15-2012

(03-15-2012, 06:30 AM)jacquesduff Wrote: Can someone give me the download link for Resscan software, I have the same problem with V 3.16. cannot see the SD card or USB despite installing drivers

Do NOT install the drivers.
That by itself may be your problems.

RE: ResScan Data Download Problem - mjholdeman - 03-15-2012

[/quote]

Hi mjholdeman, welcome!

All you have to do to download previous versions of ResScan is to change the 3.16 at the end of the download link to whatever version you want (like 3.14 for instance). It will take you to the download site for that particular version... the link stays the same for each version except for the 14 changing to 16 at the end of the URL.

Coffee
[/quote]

Thanks, but I must be slow (lack of sleep?), the link sent to me takes me to a registration page. After I fill that out I go to another page with a link to the download but I can't see the address it's pointing to. The link shows as a JavaScript:doDL function call. I don't see a place to replace the 16 with a 14.

Thanks again.


RE: ResScan Data Download Problem - SuperSleeper - 03-16-2012

(03-15-2012, 08:38 PM)mjholdeman Wrote: Thanks, but I must be slow (lack of sleep?), the link sent to me takes me to a registration page. After I fill that out I go to another page with a link to the download but I can't see the address it's pointing to. The link shows as a JavaScript:doDL function call. I don't see a place to replace the 16 with a 14.
Thanks again.

You don't look on the page itself for the web address... once you're on the registration page (before you fill out any info), it's up at the top of your web browser - like at the top of this page window, in your browser, you'll see it starting with http://www.apneaboard.com/forum.... etc. Go to the end of that address and change the numbers to whatever version you want, then hit your enter key on your keyboard.

Let me know if it works, okay?

Smile


RE: ResScan Data Download Problem - jainujohn - 03-16-2012

I had the same problem, After running ResScan wait for 2-3 minuts. Then Install the USB card reader with data card installed. Please Make sure the lock is kept in unlock position.

FlashPath card reader
If using the FlashPath card reader, activate it by right-clicking the icon at the bottom of your computer screen. Turn on `Check A:/B: for card data'. You will be able to hear the drive searching for data if a disk with data is not inserted.




RE: ResScan Data Download Problem - svwilbur - 03-22-2012

I have this same issue:
> I run ResScan with the title "_ASSERTE:" and the text of "intf!=0 @ C:\PROGRA~1\Borland\CBUILD~1\Bin\..\include\vcl\UtilCls.h/2868
Press [Y]es to terminate, [N]o to continue and [C]ancel to Debug"
It doesn't seem to matter what I choose, ResScan starts but I can't see the SD card.

I can see the card mounted as L:
I can look at the drive and it shows two folders and 4 files:

DATALOG
SETTINGS
Identification.crc
Identification.tgt
STR.crc
STR.edf

I just tried UNLOCKing the SD card and reinserting it and does not help. It still does not see the card in ResScan:

============================================
! There are NO devices available for downloading data

Connect a flow generator or data card and try again.

OK

============================================

Then it pops up a screen for Download data:

============================================
To begin downloading with the following details, simply press the
Start Download button.

Patient my name
Device [this is blank ]
Data All available data [Select]

Typical
Download [this is blank]
Times

[Start Download] [Close]
============================================


It lets me select the select key and I can specify the type of data.

But I can not select the [Start Download] button as it is grayed out.
I assume that is becausee it never found the SD card data.
I can only press the [Close] button.


So my questions:

1) if I just want to read a SD card from a S9 autoset do I need any of those ResMed Drivers during the install?

2) Why am I getting the Assert error?:
_ASSERTE:
? intf !=0 @
CTongueROGRA~1\Borland\CBUILD~1\Bin\...\include\vcl\UtilCls.h/2868

3) is there a way to just copy the stuff on the SD card to some location in
c:\program files\ResMed\ so that the ResScan program can see them
and use them as if they were already downloaded?