+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Respironics Model: BiPAP Auto Core Pkg-N.A. Model No. 1017442 Respironics Encore Pro (/Thread-Respironics-Model-BiPAP-Auto-Core-Pkg-N-A-Model-No-1017442-Respironics-Encore-Pro)
Respironics Model: BiPAP Auto Core Pkg-N.A. Model No. 1017442 Respironics Encore Pro - philowerx - 08-30-2013
My apnea hasn't fixed itself so I'm trying yet again to master the CPAP.
I have a Respironics
Model: BiPAP Auto Core Pkg-N.A.
Model No. 1017442
Respironics Encore Pro Smart Card
I have a problem where I blow out of my mouth once I'm super relaxed so I switched from a Mirage Swift FX and chin strap to a ResMed Ultra Mirage Full Face Mask. There's no more blow out but I'm really relaxed and close to sleep I'm noticing the frequently enough to startle, the whole mask jumps at the moment I go from exhale to inhale. My settings were: AbPAP / min EPAP 6.0 cm H2O / max IPAP 9.0 cm H2O / max PS 3.0 cm H2O / Rise 3 / Ramp 0:00 /
Start 0:00 / Patient 0 / Light 0 / Nights 15
Today we made changes but I'm still having that mask jump. Here are the new settings:
AbPAP / min EPAP 6.0 cm H2O / max IPAP 9.0 cm H2O / max PS 3.0 cm H2O / Rise 2 / Ramp 0:00 /
Start 0:00 / Patient 1 / Light 0 / Nights 15
Any ideas on changes to smooth this out and anybody have clinician's manual?
many thanks,
philowerx
RE: Respironics Model: BiPAP Auto Core Pkg-N.A. Model No. 1017442 Respironics Encore Pro - trish6hundred - 08-30-2013
Hi philowerx,
WELCOME! to the forum.!
Hang in there for answers to your questions, someone will be able to help you soon.
Best of luck mastering CPAP therapy, it can take lots of PATIENCE.!
RE: Respironics Model: BiPAP Auto Core Pkg-N.A. Model No. 1017442 Respironics Encore Pro - PaulaO2 - 08-30-2013
6 inhale and 9 exhale is not enough to make the mask jump like that. Have you tried to tighten it just a little, tiny bit at a time until it stops? You can try this while sitting up with it on (or lay down). Take a big breath in then let it out like a heavy sigh. Between that and the pressure, you should be able to make the tightening that way vs when you lay down to sleep.
And I do mean tighten in teeny tiny amounts. Over tightening can cause leaks (and lots of pain!).
RE: Respironics Model: BiPAP Auto Core Pkg-N.A. Model No. 1017442 Respironics Encore Pro - vsheline - 09-01-2013
(08-30-2013, 07:58 PM)philowerx Wrote: I have a Respironics
Model: BiPAP Auto Core Pkg-N.A.
Model No. 1017442
BiPAP Auto BiLevel with Bi-Flex
... I'm noticing the frequently enough to startle, the whole mask jumps at the moment I go from exhale to inhale.
...
Today we made changes but I'm still having that mask jump. Here are the new settings:
AbPAP / min EPAP 6.0 cm H2O / max IPAP 9.0 cm H2O / max PS 3.0 cm H2O / Rise 2 / Ramp 0:00 /
Start 0:00 / Patient 1 / Light 0 / Nights 15
Any ideas on changes to smooth this out and anybody have clinician's manual?
Hi philowerx, welcome to the forum!
I think the right manual is available via email by request from this page:
http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
I think your manual would be called:
Respironics BiPAP Auto with Bi-flex (not the "M" series, not the "PR System One")
Adjusting the Rise to a lower setting would slightly slow down how quickly the pressure changes (how quickly the mask "jumps") but I think would not change how far the mask moves (how far the mask jumps when the pressure jumps).
Just as we are falling asleep, it is not unusual that we may have a few central apneas. Maybe your machine is sensing these apneas and is suddenly increasing the Pressure in response?
The best thing to do may be to simply ignore this - accept it, not react, just let yourself continue to fall asleep.
Or, perhaps it would help to try (at least for a while) using straight BiPAP mode, with EPAP 6.0 cm H2O / IPAP 9.0 cm H2O.
I don't know what data may be available from that unit, but if you are not set up to read its non-standard data card, you might consider buying a Pulse-Oximeter such as the CMS-50D Plus or CMS-50F, so you will have at least some data on how well your therapy is working.
Take care,
--- Vaughn