Apnea Board Forum - CPAP | Sleep Apnea
Sullivan V Elite - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Sullivan V Elite (/Thread-Sullivan-V-Elite)



Sullivan V Elite - rebake50 - 09-28-2013

I have a Sullivan V Elite machine which was issued in 1996 and I need to know if you can download the info and where can I find the program to download the data. Important to keeping my employment.


RE: Sullivan V Elite - Gustave - 09-28-2013

Hi Rebake50

Welcome

Go to "CPAP Setup Manuals" tab on top of that page, then go to section three, and there, you will get all information to download Manual for you CPAP and how to get softwares for data.

Good luck!

Au revoir!

Gustave Smile


RE: Sullivan V Elite - Bobshouse - 09-28-2013

Those old machines, I had a Sullivan, it was basically a leaf blower in a small box. I really don't think there is any available data for that one. I took mine into the doctors office last month, he saw it, and told me he couldn't even read the pressure anymore. He tried to peel off part of the bottom cushion to read total hours...was something like 27,000 or better.

Hope everything works out for you.


RE: Sullivan V Elite - trish6hundred - 09-28-2013

Hi rebake50,
WELCOME! to the forum.!
Hang in there for more responses to your post and best of luck.


RE: Sullivan V Elite - rebake50 - 09-28-2013

(09-28-2013, 05:29 AM)Bobshouse Wrote: Those old machines, I had a Sullivan, it was basically a leaf blower in a small box. I really don't think there is any available data for that one. I took mine into the doctors office last month, he saw it, and told me he couldn't even read the pressure anymore. He tried to peel off part of the bottom cushion to read total hours...was something like 27,000 or better.

Hope everything works out for you.

Thanks for the update, I may have to get a new machine but without insurance its rather costly. I see you use the S9, can you get data off that machine.


RE: Sullivan V Elite - Bobshouse - 09-28-2013

I looked up the Sullivan V Elite, looks a lot like mine, only mine is an even older model. Didn't mean any disrespect by calling it a leaf blower, but that's all mine would do, is blow air. No bells or fancy whistles, but it worked for over 10 years. My new s9 with the software can read data off the machine, but I'm still learning how to make any sense of it.

If you don't have insurance, you can find them offered without a prescription on Craigslist and ebay at times.


RE: Sullivan V Elite - PollCat - 09-29-2013

You can also try Supplier #2 on the Suppliers List at the top of this page.

Years ago, I also had one of these machines; I accidentally drowned it one night when the bypass humidifier tipped over and flooded the unit. Dielaughing