+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] Usage Statistics not recording on REMstar (/Thread-Equipment-Usage-Statistics-not-recording-on-REMstar)
Usage Statistics not recording on REMstar - IronCityDan - 10-08-2013
My REMstar® Plus M Series with C-Flex™ fell while I was sleeping and now the usage statistics on the little screen isn't recording. It's as if I'm not using the machine even though I am nightly. Has anyone else had this happen to them and if so, were you able to correct it? Thanks!
RE: Usage Statistics not recording - trish6hundred - 10-08-2013
Hi IronCityDan,
WELCOME! to the forum.!
Hang in there for suggestions to your question.
Best of luck to you.
RE: Usage Statistics not recording - PaulaO2 - 10-08-2013
No error messages, just not showing the hours? Was there water in the humidifier when it dropped?
Make sure the clock is working.
Unplug the machine for about a minute or more then plug back in.
Threaten it by holding it over the trash can and saying you'll drop it in.
Cover it in tin foil to keep the aliens from reading its mind.
(just kidding on the last 2 although the trash can one might work. Worked on an old laptop of mine.)
RE: Usage Statistics not recording - IronCityDan - 10-08-2013
Yes, there was water in it. Still shows the hours, but they are no longer updating. No error messages. Have already unplugged it. There is no clock.
(10-08-2013, 05:18 PM)PaulaO2 Wrote: No error messages, just not showing the hours? Was there water in the humidifier when it dropped?
Make sure the clock is working.
Unplug the machine for about a minute or more then plug back in.
RE: Usage Statistics not recording on REMstar - PaulaO2 - 10-08-2013
Then I am out of clues. I updated the subject line for you so this thread will attract those who know more about these machines. Sorry I couldn't help.
RE: Usage Statistics not recording on REMstar - IronCityDan - 10-08-2013
(10-08-2013, 07:04 PM)PaulaO2 Wrote: Then I am out of clues. I updated the subject line for you so this thread will attract those who know more about these machines. Sorry I couldn't help.
OK, thanks. I was thinking maybe I could reset it to start over but I can't find info on how to do that anywhere, only how to change the pressure which is fine as is.
RE: Usage Statistics not recording on REMstar - bwexler - 10-08-2013
You may have broken the internal electronics when it fell. You may have washed the electronics with water from the humidifier. They don't like to be "that" clean.
You may need to contact your DME and your insurance and get some official direction from those who hold the purse strings.
That is exactly what I have been doing for 2 days since my S9 started acting up.
RE: Usage Statistics not recording on REMstar - givememoresleep - 10-10-2013
Maybe time to upgrade to new machine if it's over 5yrs old?