+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: ResMed S9 AutoSet - Default Values Error (/Thread-ResMed-S9-AutoSet-Default-Values-Error)
ResMed S9 AutoSet - Default Values Error - robhen - 11-30-2013
My mother-in-law has a ResMed S9 AutoSet that is currently now functional.
The unit sat unplugged for a while, and it appears that the CR2032 CMOS battery died. I have replaced the battery, but am still receiving the message "Error settings reset to default values please contact service provider".
Other threads have suggested there is no cure other than to send the unit to ResMed. Do any of you have any additional information that might help before I send it off?
'apneaboard/forums/Thread-Equipment-Inside-View-of-a-ResMed-S9-CPAP-Machine'
'apneaboard/forums/Thread-CPAP-Res-Med-S9-help-Error-Settings-reset-to-default-values-please-contact-service-pr'
Sorry about the odd format references to other threads. I can't post clickable links yet.
RE: ResMed S9 AutoSet - Default Values Error - PaulaO2 - 11-30-2013
Try this if you have not already:
http://www.apneaboard.com/resmed-s9-cpap-setup
Even if you did have to send it to Resmed, you won't be able to. They only accept it from a DME.
RE: ResMed S9 AutoSet - Default Values Error - trish6hundred - 11-30-2013
Hi robhen,
WELCOME! to the forum.!
Hang in there for more suggestions and best of luck to you.
RE: ResMed S9 AutoSet - Default Values Error - robhen - 11-30-2013
(11-30-2013, 12:56 PM)PaulaO2 Wrote: Try this if you have not already:
'apneaboard/resmed-s9-cpap-setup
Even if you did have to send it to Resmed, you won't be able to. They only accept it from a DME.
Thanks, but Clinician Setup Mode does not work.
With this error, none of the inputs work at all. It recognizes none of the buttons or the wheel.
My provider (Wellstar Home Medical) is closing, and I'm working on the transfer to a new company. Just another complicating factor.
Editorial: Really? I even have to alter links in the portion I quoted from another post?
RE: ResMed S9 AutoSet - Default Values Error - PaulaO2 - 11-30-2013
(11-30-2013, 03:53 PM)robhen Wrote: Thanks, but Clinician Setup Mode does not work.
With this error, none of the inputs work at all. It recognizes none of the buttons or the wheel.
My provider (Wellstar Home Medical) is closing, and I'm working on the transfer to a new company. Just another complicating factor.
Yeah, I was afraid of that. Resmed has a 2yr warranty. They go by the numbers on the back as to if it is within the warranty period. If she needs a machine and does not have insurance, look into getting one from Supplier #2 from the Supplier's list. They sell open box and "gently used" machines. If the humidifier is still good, she could get just the blower unit.
http://www.apneaboard.com/forums/Thread-CPAP-Supplier-List
Quote:Editorial: Really? I even have to alter links in the portion I quoted from another post?
Yes, it is part of our anti-spammers blocking. It works quite well but can be understandably frustrating to new users. The payoff is well worth it, though.