reset recorded internal data - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: reset recorded internal data (/Thread-reset-recorded-internal-data) |
reset recorded internal data - ggarcia - 12-03-2013 Hi All From Brazil, my 1st post. I bought my machine used, and willing to reset internal data. Is there any way? RE: reset recorded internal data - zonk - 12-03-2013 Hi ggarcia and welcome Instruction: section one Clinical manual, direct download : section two http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual RE: reset recorded internal data - ggarcia - 12-03-2013 Thank's, zonk, but there is no way to do this in my machine. (by manual...) RE: reset recorded internal data - trish6hundred - 12-03-2013 Hi ggarcia, WELCOME! to the forum.! Hang in there for more suggestions and best of luck to you. RE: reset recorded internal data - ggarcia - 12-04-2013 Well, right manual, right information... I asked the Respironics BiPAP Auto-M Series manual by email, section trhree and bingo! "You can reset these values to zero from the Therapy Usage screen by pressing the – button for approximately 5 seconds." Thanks to apneaboard and to all who tryed to help. Really nice forum. RE: reset recorded internal data - zonk - 12-04-2013 Glad you find it, not much cannot be found around here |