[Equipment] RESMED S9 Power Brick - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: [Equipment] RESMED S9 Power Brick (/Thread-Equipment-RESMED-S9-Power-Brick) |
RESMED S9 Power Brick - tacoma - 12-12-2013 Hi all, I've found that Epson PS 180 has use the 3-pin plug as RESMED S9 power supply. Could anyone let me know the plus , minus and natural pin of the genuine S9 power supply? Thanks RE: RESMED S9 Power Brick - PaulaO2 - 12-12-2013 Tacoma, I can't answer the question but I updated your subject line. We call the non-data capable machines "bricks". So to make sure the folks who knew about the power bricks saw your post, I added that word. RE: RESMED S9 Power Brick - zonk - 12-12-2013 Hi tacoma I don,t know about Epson PS 180 but you can use any power cord between the wall outlet and the S9 power brick as long as both ends fit the wall outlet and S9 power brick. For example if I buy the machine from US and wanted to use in Australia, all I need is to change the power cord (S8 power cord will fit) or get a plug adapter that fit in my wall outlet Edit: If your in US, Supplier #1 sell the power brick which include power cord or power cord can be purchased separately Suppliers List http://www.apneaboard.com/forums/Thread-CPAP-Supplier-List RE: RESMED S9 Power Brick - trish6hundred - 12-12-2013 Hi tacoma, WELCOME! to the forum.! Hang in there for more responses to your post and best of luck to you. |