[Equipment] Am I doing something wrong? - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: [Equipment] Am I doing something wrong? (/Thread-Equipment-Am-I-doing-something-wrong) |
Am I doing something wrong? - justMongo - 05-12-2014 I use a standard 22 mm hose on my machine. So, I have my humidifier set to manual. Standard routine.... I put on my mask, connect my hose, then press start. I then have to push the knob down as it is giving me an opportunity to change my humidifier setting from the 4.5 I have come to prefer. I'd rather just press start and go... Am I missing a setting in setup? RE: Am I doing something wrong? - darkcat - 05-12-2014 Ya my S9 elite does the same thing. I have never noticed an issue though. I just hit start and it stays on the setting. RE: Am I doing something wrong? - PaulaO2 - 05-13-2014 It should stay on the setting you last had it in. It just gives you the chance to change it if you want. I just turn it on and ignore. RE: Am I doing something wrong? - justMongo - 05-13-2014 Last night, I just pressed start. I found that pressing the knob was not required. So, I'll conclude I was doing something wrong in that I was taking an unnecessary step. (I did turn the knob last night to 5.0 as it was really dry here yesterday.) Thanks everyone. |