+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: REScan Data Import (/Thread-REScan-Data-Import)
REScan Data Import - ENJ - 05-21-2014
I have ResScan installed per instructions (not installing drivers) and it seems to run ok... I can even bring up the Examples and see that data...
I have my SD Card connected through USB and can see data and the correct files on the card...
This configuration works well with SleepyHead as data import or reading files from directories on my system...
HOWEVER; I can't get Rescan software to IMPORT data from the SD card or system files...
Running win 8.1...
Using: Respironics REMStar Auto A-Flex & System One HTD Humid...
As a second attempt I did install the Rescan Drivers (they didn't make any difference)... I have since removed them...
I have searched the Forum but couldn't find anything specific...
there is a lot of info on this subject, I apologize if it has already been addressed...
Any ideas are appreciated...
Thanks
Ed
RE: REScan Data Import - retired_guy - 05-21-2014
When rescan starts up it will see the sdcard and open up a dialog box to try to import from it. "X" out of that box.
Then, if you haven't already, click "New Patient" and set yourself up as a patient in their database. Then "Open" that patient. Click on your name, and the open button in the lower right corner. Then once you are opened up, click on "Download Data."
RE: REScan Data Import - ENJ - 05-21-2014
Thanks so much for your quick response...
I just tried your suggestion...
I had the SD card plugged in...
Started rescan ... it did not provide an attempt to import...
I had already set myself up as new patient...
when I try to IMPORT after selecting my name I get the following...
"Connect a flow generator or data card and try again"
Apparently rescan isn't seeing my SD Card...
With WINDOWS Explorer I can see the card and by drilling down see all the data...
So I know Win 8.1 is seeing it, but Rescan is NOT...
Any other idea...
Thanks
Ed
RE: REScan Data Import - trish6hundred - 05-21-2014
Hi ENJ,
ResScan is for Resmed machines and doesn't work with Respironics machines. For those machines, you need Encor or Encor basic but hang in there for more suggestions.
RE: REScan Data Import - herbm - 05-21-2014
trish600 had your answer.
Rescan = Resmed.
You need the Respironics software.
SleepyHead does both.
RE: REScan Data Import - retired_guy - 05-21-2014
(05-21-2014, 01:49 PM)trish6hundred Wrote: Hi ENJ,
ResScan is for Resmed machines and doesn't work with Respironics machines. For those machines, you need Encor or Encor basic but hang in there for more suggestions.
(05-21-2014, 02:03 PM)herbm Wrote: trish600 had your answer.
Rescan = Resmed.
You need the Respironics software.
SleepyHead does both.
Yup. Missed that. Sometimes the answer is staring us right in the eye and we don't see it.
Alternately, you could by a Resmed machine. But that would seem to be overkill..............
RE: REScan Data Import - ENJ - 05-21-2014
YUK... There you go... I knew it was a simple answer...
not the one I wanted... but you can't have everything...
I see where board members have PM'd the link for Encore or Encore Basic to some users...
If someone would be so kind, I would appreciate the link...
I use Sleepyhead, have made a donation but have never gotten my PluseOx data to upload...
I was hoping for another solution...
Thanks again for all the quick responses...
Ed