[Equipment] Oximeter - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: [Equipment] Oximeter (/Thread-Equipment-Oximeter--6216) |
Oximeter - Gavgaffa - 05-22-2014 I have purchased a Resmed S9 autoset without a humidifer and use a simplus full face mask. Now apparently the S9 has a oximeter adapter which I can purchase through the local CPAP direct store on the sunshine coast of Queensland Australia for about $80. I have been told that the resmed oximeter cost is about $800 . I have been told that I can connect a Nonin Xpod oximeter to this adapter so I can record the oxygen levels onto the data card I use for Therapy compliance. Can anyone confirm this or if not suggest a different approach. I would like to record data to the S9 because that way the info is all in one spot. I use Rescan software. Thank you. RE: Oximeter - trish6hundred - 05-22-2014 Hi Gavgaffa, WELCOME! to the forum.! Hang in there for answers to your questions and best of luck to you. RE: Oximeter - becker44a - 05-22-2014 (05-22-2014, 05:13 AM)Gavgaffa Wrote: . . . Hi Gavgaffa, I have been doing a good bit of research on oximeters recently, and your information agrees with what I have found, other than cost. Here in the US, the ResMed oximeter adapter is said to sell for about $400 (if you can find it), and the Nonin Xpod pushes the price well up over $1000. At that rate, most folk look for another path. I am currently looking at the "Overnight Oximeters" at Supplier #19. Some of these are compatible with Sleepyhead, although the data is not directly on the SD card: other procedures are used for transferring the data into Sleepyhead. Good Luck with the oximeter, and with your therapy. Let us know how it works out. A.Becker RE: Oximeter - bwexler - 05-23-2014 If they are really offering the Resmed oximeter for $80 I would be afraid to touch it for fear of burning my hands on a hot (stolen) item. I bought a CMS 50i from supplier 19. Only problem is Sleepyhead doesn't know how to read its format yet, but it comes with adequate software. |