+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [CPAP] Transcend - Device Not Connected (/Thread-CPAP-Transcend-Device-Not-Connected)
Transcend - Device Not Connected - rahellstern - 06-24-2014
When launching the Transcend software I get the error message in red "Device Not Connected." The password 'juniper' lets me in but there is no connected device despite the USB being plugged in. Any ideas? rah
RE: Transcend - Device Not Connected - trish6hundred - 06-24-2014
Hi rahellstern,
WELCOME! to the forum.!
Hang in there for suggestions and best of luck to you with your CPAP therapy and figuring out your machine.
RE: Transcend - Device Not Connected - Transcend Support - 06-24-2014
(06-24-2014, 05:53 AM)rahellstern Wrote: When launching the Transcend software I get the error message in red "Device Not Connected." The password 'juniper' lets me in but there is no connected device despite the USB being plugged in. Any ideas? rah
Hi Rah,
This is the official account for Transcend Customer Support. We're sorry to hear you're having an issue with your software, but it should be a simple fix. Try closing out of the software program and disconnecting your CPAP from the computer. Reattach your CPAP to the computer before you relaunch the Transcend software, then the software should be able to recognize your CPAP device. If you have any further issues, please don't hesitate to contact our customer service department directly (877-621-9626).
Have a great day!
-Transcend Customer Support
You can also email Transcend Customer Support at info@somnetics.com.
RE: Transcend - Device Not Connected - zonk - 06-24-2014
(06-24-2014, 02:37 PM)Transcend Support Wrote:Nice to have someone from the company respond to our inquiries, others manufacturers should follow suit(06-24-2014, 05:53 AM)rahellstern Wrote: When launching the Transcend software I get the error message in red "Device Not Connected." The password 'juniper' lets me in but there is no connected device despite the USB being plugged in. Any ideas? rah
Hi Rah,
This is the official account for Transcend Customer Support. We're sorry to hear you're having an issue with your software, but it should be a simple fix. Try closing out of the software program and disconnecting your CPAP from the computer. Reattach your CPAP to the computer before you relaunch the Transcend software, then the software should be able to recognize your CPAP device. If you have any further issues, please don't hesitate to contact our customer service department directly (877-621-9626).
Have a great day!
-Transcend Customer Support
You can also email Transcend Customer Support at info@somnetics.com.
to you both RE: Transcend - Device Not Connected - keylempi - 06-01-2018
(06-24-2014, 05:53 AM)rahellstern Wrote: When launching the Transcend software I get the error message in red "Device Not Connected." The password 'juniper' lets me in but there is no connected device despite the USB being plugged in. Any ideas? rah
I had the same issue on my Transcend Auto on my computer. When I would click the ? box on the software screen it showed that the Transcend was connected, but it still had the red "Cannot find device..." statement. I was able to get it programed by installing the software on my wife's computer and it worked like a charm. Still can't get it to work on my computer for some reason though. i'll try reinstalling the software. Maybe that'll fix it.
Ken
RE: Transcend - Device Not Connected - Crimson Nape - 06-01-2018
If you're running Win 10, you may have to run this software in Compatibility mode. You might try XP Sp3 or Win 7.
RE: Transcend - Device Not Connected - keylempi - 06-01-2018
keylempi
(06-24-2014, 05:53 AM)rahellstern Wrote: When launching the Transcend software I get the error message in red "Device Not Connected." The password 'juniper' lets me in but there is no connected device despite the USB being plugged in. Any ideas? rah
. i'll try reinstalling the software. Maybe that'll fix it.
Ken
Well, reinstalling the software didn't work. I did take the drastic step of performing a Windows 10 reset which cost me a bunch of programs and apps that had been installed. On the bright side, once I reinstalled the Transcend software it worked like a champ!
For whatever it's worth.
Ken
RE: Transcend - Device Not Connected - Douglas Racer - 06-14-2021
I had the same problem and installed a cp2103 bridge controller driver and was able to get it connected. I still have a problem with my machine where it will only turn on intermittently. The LED's flash correctly when it's powered and I can get into it with the software now. But it won't turn on with the button. I got it to turn on a couple times but more often than not it won't. I bought the machine used but I was told it had never been used and the info inside it seems to verify that. Why won't it turn on consistantly?