+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: ICON Auto Error Code 5.03 (/Thread-ICON-Auto-Error-Code-5-03)
ICON Auto Error Code 5.03 - ark - 04-07-2012
Yesterday I was switched from a fixed pressure of 9 to an auto range of 4-20. Last night the machine pressure kept switching off after about 20 min or so with an error code of 5.03 (I kept resetting the machine by unplugging and then replugging it into the AC power. I'm sure there is a better way to "get past" the error condition, but I couldn't find it). I can't get ahold of my DME until Monday. So I have a few questions:
1. In general, do CPAP machines on Auto (range) mode report an error and switch off the pressure if max range pressure is reached?
2. Does anyone know where I can find a list of ICON Auto error codes?
3. Does anyone happen to know what error code 5.03 means?
Thanks,
ark
RE: ICON Auto Error Code 5.03 - PaulaO2 - 04-07-2012
Dang. I did a big Google search and can't find it. All the F&P site says is to contact your dealer for information on the error code.
Big help.
I'd take it back and have them fix it or tell you what they did wrong.
RE: ICON Auto Error Code 5.03 - greatunclebill - 04-07-2012
(04-07-2012, 12:40 PM)PaulaO2 Wrote: Dang. I did a big Google search and can't find it. All the F&P site says is to contact your dealer for information on the error code.
Big help.
I'd take it back and have them fix it or tell you what they did wrong.
this one has me stuck too. i can usually find anything. i was also looking for the service manual.
RE: ICON Auto Error Code 5.03 - TennDan - 04-07-2012
Can you look at the data and see the what the highest pressure it got to? Do you know how to change the minimum and maximum pressures or change it back to constant? The clinician's manual can be found in the forums. Since you can't get any help until Monday, if it was me, I'd some expermenting.
RE: ICON Auto Error Code 5.03 - ark - 04-07-2012
(04-07-2012, 02:31 PM)TennDan Wrote: Can you look at the data and see the what the highest pressure it got to? Do you know how to change the minimum and maximum pressures or change it back to constant? The clinician's manual can be found in the forums. Since you can't get any help until Monday, if it was me, I'd some expermenting.
I will probably put it back to a constant pressure until I can talk to my DME. I'm in my initial 30 days of compliance requirements so don't want to skip days if I don't have to.
Thx to all for looking into this issue.
ark
RE: ICON Auto Error Code 5.03 - TennDan - 04-11-2012
Checking back to see if you had any luck with your DME?