+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] Contec CMS50E Oximeter (/Thread-Equipment-Contec-CMS50E-Oximeter)
Contec CMS50E Oximeter - John Australia - 10-04-2014
Hi All,
Been battling this little beast now for hours and I'd really value some assistance.
It records data fine and uploads under control of the PC's SPO2 Review software. BUT - Although the Review software displays the data and prints the reports (some anyway) it does NOT record the data to disk automatically and there doesn't seem to be any facility to do so manually. Uploading the data clears the oximeter's memory and closing the program loses the data that was uploaded - result no data, start again. I'm running software V1.5 .
Is this a known issue? Should the software be saving automatically? Or perhaps I'm just not having a good day!
John
RE: Contec CMS50E Oximeter - PaulaO2 - 10-05-2014
The files are probably there but you can't see them.
From our wiki page:
Quote: In Windows 7, it is located wherever the program installed itself in the "Data" folder. If you navigate to that folder outside of the program, you will not see any files listed. You must click the 'Compatibility Files' option which then takes you to: C:\Users\[user profile name]\AppData\Local\VirtualStore\Program Files (x86)\SpO2\Data
RE: Contec CMS50E Oximeter - John Australia - 10-05-2014
Hi Paula,
Thank you so much! I have much to learn. The files are indeed exactly where you said they would be. I'll have to explore that wiki page too.
Thank you!
John
RE: Contec CMS50E Oximeter - PaulaO2 - 10-05-2014
http://www.apneaboard.com/wiki/index.php?title=SpO2_software
http://www.apneaboard.com/wiki/index.php?title=Importing_CMS_50D_Plus_oximeter_data_into_SleepyHead
It is for the 50D Plus but the software should be the same. Please let me know if there are any big differences for you with yours and I'll update the wiki page.
RE: Contec CMS50E Oximeter - John Australia - 10-05-2014
Hi Paula,
The CMS50E seems very similar to the 50D, with some differences in starting recording (clock which is behind the "record" button should be set to time of day, then recording started.)
One very important fact that probably also applies to the 50D - It is essential to use the USB cable supplied with the device, not just any USB cable that comes to hand. They look the same, but the correct one includes a USB to serial adapter. It's a very frustrating trap for those not in the know!
Cheers
John