New Guy having troubles with GoodKnight 425 ! - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: New Guy having troubles with GoodKnight 425 ! (/Thread-New-Guy-having-troubles-with-GoodKnight-425) |
New Guy having troubles with GoodKnight 425 ! - MuzzleMike - 10-21-2014 I have a GoodKnight 425 Bipap . I have had it for a very long time . I can not remember when I got it . I stopped using it a while back . I was having troubles sleeping with it . Not sure why . I decided I better get back on it to get some sleep . I plugged it in and got a code ER 15 . I unplugged it and plugged it back in and the same thing happened . I tried some of the buttons and it started to work . Seams to be working but the counter started all over again . I am going to get a hold of the Doc to get a supplier for the supplies . Should I ask for them to look at the Bipap also ? Thank You MM RE: New Guy having troubles with GoodKnight 425 ! - Whitewabit - 10-22-2014 found this after I Googled the error code .. Looks like it might be a dead or very low internal battery probably used for the clock .. "Open the unit from the 4 screws at the bottom of the device (torx) You can locate a 2032 battery with pins on the side of the unit Change the battery , plug and unplug your device twice. This solved Er 15 on goodknight 425 " RE: New Guy having troubles with GoodKnight 425 ! - trish6hundred - 10-22-2014 Hi MuzzleMike, WELCOME! to the forum.! Hang in there for more responses to your post and best of luck to you in getting your machine working. |