+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Resperonics system One BiPap hard to start (/Thread-Resperonics-system-One-BiPap-hard-to-start)
Pages:
1
2
Resperonics system One BiPap hard to start - Wheezing in Williamsport - 11-17-2014
Hi, First post for me here. For the past three weeks I have had to huff and puff to kick my BiPap ( CPAP ) in to gear with mask. The press button rarely works to start it now. Sometimes I remove the SD card and/or the humidifier tray and reinsert and sometimes that seems to help.
My unit is about 3 years old and I would be lost without it. I have 17 lbs inhale and 13 lbs exhale pressure. My Dr ordered a check on my SD card and the company wont get back to me. I also have 3 liters of oxygen hooked up as well to my tube.
What can I do? Is my unit getting ready to die? Thank you.
I know I should take a deep breath and relax but I can't. LOL
RE: Resperonics system One BiPap hard to start - surferdude2 - 11-17-2014
I suspect your unit is going south on you. If you have checked all the easy stuff, like verifying that the plug is securely connected at the wall receptacle, the power cord is firmly inserted into the machine, etc, etc, then you'll need to take it in to your DME supplier for a replacement. Call them asap for further info since they may need to expedite getting a replacement unit. Involve your doctor as well so that you will get taken care of sooner.
RE: Resperonics system One BiPap hard to start - Galactus - 11-17-2014
Have you tried using the mask auto on feature? Is the button the issue or the unit? If the button the auto on may help you. Just a thought.
RE: Resperonics system One BiPap hard to start - Wheezing in Williamsport - 11-18-2014
Last night after posting, I looked around some more in this forum. From there I found a post that mentioned changing the SD card. I got a used 2GB card and formatted it and somehow go through the menu and set up a few things different. Auto on was on. But the start up number for using the mask to start was at something like 7.5 so I changed it to 4.5. I don't know what changes made a difference but it started right up both by pressing the button and using the mask to kick it on. Thank you for the responses too. Hopefully I am good to go.
RE: Resperonics system One BiPap hard to start - trish6hundred - 11-18-2014
Hi Wheezing in Williamsport,
WELCOME! to the forum.!
Hopefully yougot your machine straightened out.
Yes, there is lots of great information here on the board.
One thing I might suggest, I know these machines are expensive, but you might take a look at Supplier #2 here on this forum. They have either open-boxed or gently-used machines at great prices, this way, you will have a backup machine.
The suppliers list is at the top of each page.
Hang in there for more responses to your post and I wish you much success as you continue your CPAP therapy.
RE: Resperonics system One BiPap hard to start - Wheezing in Williamsport - 11-18-2014
Well, I thought I had it fixed but I couldn't get it to start up period. Then I took out my SD card and it started up on its own. Weird? Hope it does when I hit the hay tonight. I'm leaving the SD card out and calling the Medical supplies place I got it tomorrow. Maybe it needs serviced or re-programed. I'll update later.
I also checked out secondwind up there. It's an alternative solution. Thank you trish6hundred
RE: Resperonics system One BiPap hard to start - surferdude2 - 11-18-2014
There could be a break in some foil of the circuit board and when you move the SD card around, it might cause it to intermittently make connection or break connection, depending on your luck at the moment. Usually that type of problem is responsive to temperature change so that might explain why it often happens in the middle of the night when things often cool down. The reverse can also be true and it may fail under rising temperatures. I'd not trust it so you're thinking right when you mention calling the place that sold it to you.
Good luck.
RE: Resperonics system One BiPap hard to start - Galactus - 11-18-2014
Could be a fault in the SD card socket as well, could be the card reader function is shot and putting the card in there is creating a fault.
RE: Resperonics system One BiPap hard to start - Wheezing in Williamsport - 11-19-2014
I got a friendly reply from my medical supplies person. They told me they will check it out and I might get a new unit that was used for maybe a month and returned from a Medicare patient that was not using it so Medicare refused to pay on it. It's like new and won't cost much. Then I might sell my broken unit to that secondwind place if it turns out this is the case. Just hope it holds out til I get it working or get a new used one.
RE: Resperonics system One BiPap hard to start - Sleepster - 11-20-2014
I like to have a back up unit in the closet, ready to go. Just in case. When my BiPAP started to fail I bought another one used on craigslist, and then the ResMed VPAP Auto that I'm using now.