+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Resmed 8 Autoset II (/Thread-Resmed-8-Autoset-II)
Resmed 8 Autoset II - Ryd - 04-18-2012
What is required to access the data from this machine........Thanks
RE: Resmed 8 Autoset II - PaulaO2 - 04-18-2012
You mean the data on the card or the data inside the machine?
I believe ResScan would work as well as Sleepyhead. Both are software found here:
http://www.apneaboard.com/forums/Forum-Private-Files-and-Links
That's also where you would get the manual for it if you no longer have it.
RE: Resmed 8 Autoset II - zonk - 04-18-2012
Hi Ryd, welcome to apnea board
Efficacy data available via the S8 screen (AHI, leak, pressure)
Via the ResScan software, if the S8 have a card stuck in it you need to get the smart card reader which is difficult to get hold of but you can try ebay from Israel. SleepyHead for now doesn't support S8
Take a look at the S8 educational video from Supplier #25 (supplier list)
The manual Paula mentioned available from here, scroll down to section three
http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
RE: Resmed 8 Autoset II - CHanlon - 04-19-2012
(04-18-2012, 10:59 PM)zonk Wrote: Hi Ryd, welcome to apnea board
Efficacy data available via the S8 screen (AHI, leak, pressure)
Via the ResScan software, if the S8 have a card stuck in it you need to get the smart card reader which is difficult to get hold of but you can try ebay from Israel. SleepyHead for now doesn't support S8
Take a look at the S8 educational video from Supplier #25 (supplier list)
The manual Paula mentioned available from here, scroll down to section three
http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
Yeah, that one is a proprietary reader, isn't it? Have to have the specific ResMed reader for it...
RE: Resmed 8 Autoset II - Dreamcatcher - 04-19-2012
Finally someone with my machine
Right, you can access some data via the clinicians menu on the machine via a combination of button pressers. Question is why you want the data? If its just to look what your AHI, pressure and leaks then PM me and I will tell you the combination but if its to change settings then I strongly advise you to seek medical advise first before attempting any changes to your settings.
To check your data through ResScan then you need a data card usually from Canada via Ebay and you need a card reader again from Ebay and this usually comes from Israel. The cost of both off these I think is around $70 (Not sure) I paid around £50.00
ResScan is the only software you can use with the S8 as Sleepyhead is for S9 and SD Cards which the S8 doesnt have. I hope this helps