+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: VGA connector on ResMed AutoSet Respond S7? (/Thread-VGA-connector-on-ResMed-AutoSet-Respond-S7)
VGA connector on ResMed AutoSet Respond S7? - big_dave - 04-20-2012
I'm trying to pick through the info on downloading the data from my machine. I noticed it has a COM port and a VGA port, but when I connected the VGA port to my monitor, I didn't get a signal. Is there a trick to activating this port? Or does it become active when the COM port is connected to a computer? I would appreciate any available info.
RE: VGA connector on ResMed AutoSet Respond S7? - SuperSleeper - 04-20-2012
Someone correct me if I'm wrong, but I think you need the old ResLink adapter to get data off of an S7 unit, correct?
Here's the info about ResLink from the ResMed website:
http://www.resmed.com/us/products/reslink/reslink.html?nc=patients
Not sure, but I don't think many places even sell the ResLink adapters any more.
RE: VGA connector on ResMed AutoSet Respond S7? - big_dave - 04-20-2012
Thanks for the info. I noticed in the manual that the ResLink connects only to the 15-pin port, not the COM port, which tells me two things:
1. The 15-pin port is not a VGA port although I could connect a VGA cable to it.
2. There is probably another way of data-linking to the machine.