+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: My S9 not giving me graphs for Sleepyhead or ResScan??? (/Thread-My-S9-not-giving-me-graphs-for-Sleepyhead-or-ResScan)
My S9 not giving me graphs for Sleepyhead or ResScan??? - BigBob2 - 02-06-2015
First, I so glad and a bit supprised to find a location with a high degree of quality information, not the norm.
Was doing my AM download to Sleepyhead it downloaded summary info. only(no charts). Removed the card and inserted to card in to the S9 but got the same results. I pulled up Res Scan and rec. the same - only summary data. S 9 is less than a month.
Anyone had this happen? All ideas appreciated.
Bob
RE: My S9 not giving me graphs for Sleepyhead or ResScan??? - trish6hundred - 02-06-2015
Hi BigBob2,
WELCOME! to the forum.!
I don't use the data management software but hang in there and someone will be along to help.
Much success to you as you continue your CPAP therapy.
RE: My S9 not giving me graphs for Sleepyhead or ResScan??? - archangle - 02-06-2015
Welcome Rob.
What versions of SleepyHead and ResScan are you using?
If it's not SleepyHead 0.9.8-1, download that from here:
http://www.sleepfiles.com/SH/index.html?TestingVersions
RE: My S9 not giving me graphs for Sleepyhead or ResScan??? - BigBob2 - 02-06-2015
[quote='archangle' pid='99761' dateline='1423245242']
Welcome Rob.
What versions of SleepyHead and ResScan are you using?
If it's not SleepyHead 0.9.8-1, download that from here:
Thanks for the link. which I upgraded, but did not help. Maybe this is just a fluke ? Before today all was well, still have charts of history. I will try in the AM again. The ResMed software is 5.3
Oh BTW new software is nice.
Bob
RE: My S9 not giving me graphs for Sleepyhead or ResScan??? - Crimson Nape - 02-06-2015
(02-06-2015, 04:26 PM)BigBob2 Wrote: Thanks for the link. which I upgraded, but did not help. Maybe this is just a fluke ? Before today all was well, still have charts of history. I will try in the AM again. The ResMed software is 5.3
Oh BTW new software is nice.
Bob
Just in case it's the normal problem, try right-clicking in the graph area.
RE: My S9 not giving me graphs for Sleepyhead or ResScan??? - justMongo - 02-06-2015
I have the same machine. When I first got it, it would not record the high rate data.
I had to disconnect power for some minutes; then reconnect; and it worked.
Summary data is kept on the machine; The data card records 30 days of detailed data and 7 days of high sample rate data.
Once lost from the card, it cannot be recovered as the data only lives on the card.
A defective card is a possibility.
RE: My S9 not giving me graphs for Sleepyhead or ResScan??? - archangle - 02-06-2015
There is a "sleep quality" setting in the provider menu that has to do with AHI display. It should be set to on to display data.
In theory, it only affects the LCD display, not the SD card data, but check it.
RE: My S9 not giving me graphs for Sleepyhead or ResScan??? - BigBob2 - 02-07-2015
Thanks to archangle, justMongo,sgearhart, for all suggestions,tried each but nothing changed. I opened the file this AM and info. was there for today. Info for the 6th is void except for summery info. Anyway seams to be ok for now.
Bob
RE: My S9 not giving me graphs for Sleepyhead or ResScan??? - Sleeprider - 02-07-2015
It's possible the SD card was not fully seated in the machine at the time the detailed information is written, just as it is turned off. I have forgotten to put the SD back into the machine a time or two. It records summary information, but the details for that day never appear. As long as the card is properly in-place from the beginning of a session until the machine stops writing to disk at the end of therapy, you will probably have the detailed data.
RE: My S9 not giving me graphs for Sleepyhead or ResScan??? - BigBob2 - 02-07-2015
(02-07-2015, 11:05 AM)Sleeprider Wrote: It's possible the SD card was not fully seated in the machine at the time the detailed information is written, just as it is turned off. I have forgotten to put the SD back into the machine a time or two. It records summary information, but the details for that day never appear. As long as the card is properly in-place from the beginning of a session until the machine stops writing to disk at the end of therapy, you will probably have the detailed data.
Thanks for you info. - Sounds like just what happened. I will be more attentive in the future.
Thanks again for sharing your past experiences
Bob