+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Pressure Change (/Thread-Pressure-Change)
Pressure Change - dougjohnson - 04-19-2015
I use a ResMed Elite S9 at a pressure setting of 19 and I've noticed that after about an hour the pressure drops significantly causing me to wake up, is this normal? Is this something I can adjust?
RE: Pressure Change - DeepBreathing - 04-19-2015
G'day Doug, welcome to Apnea Board.
The Elite should maintain a constant pressure all night. If it does drop suddenly, two things come to mind - 1) the machine is experiencing a malfunction, or 2) there is a significant leak. A pressure of 19 is very high - almost at the upper limit of what the machine can produce, so it's not impossible it's overheating. But more likely you're experiencing a leak somewhere along the system.
I see you're not using software - I'd suggest you install Sleepyhead and monitor what's happening. http://www.sleepfiles.com/SH2/ Sleepyhead is user-friendly (to quote an old term) and will indicate the pressure, flow rates, leaks etc. In the absence of software, you can also check the LCD display - press the two silver buttons together for 3 seconds. Then use the push-dial to select and click on the second icon from the top, which will give you a detailed list of your parameters including 90% leaks. This might give you a clue as to what's happening, but the software gives a much more comprehensive report.
RE: Pressure Change - trish6hundred - 04-19-2015
Hi dougjohnson,
WELCOME! to the forum.!
Hang in there for more suggestions and answers to your question and much success to you with your CPAP therapy.