Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Resmed S8 Autoset Vantage Pressure results question
#1
Resmed S8 Autoset Vantage Pressure results question
Hi, I've just recently changed my s8 Autoset Vantage to Auto mode from the Cpap mode I've had it on for 10 years.  After a sleep the machine now shows the length of the sleep (if I'm asleep - my mask is on), and a pressure level.  In cpap mode it was set at 11, but my results show 9.6.  In auto mode it has now has shown 6.8 the first morning and 8 each of the next two mornings.  Does anyone know if this is the highest pressure used during that sleep session or possibly the average pressure used?  I have a second straight cpap machine (brick) that I use while traveling and want to readjust the pressure on this machine based on the results of my auto machine (I have recently lost a little weight and suspect I can use a lower pressure than originally prescribed).

Thanks for any help that can be provided!
Post Reply Post Reply
#2
RE: Resmed S8 Autoset Vantage Pressure results question
The number showing on the first screen is the pressure blowing at that moment. There's another pressure number that appears in the menus or in ResScan, together with AHI, leak rate, and time of use. That's the 95% pressure. The pressure is lower 95% of the time, and higher 5% of the time. ResScan also reports average pressure.
Post Reply Post Reply
#3
RE: Resmed S8 Autoset Vantage Pressure results question
(01-25-2017, 08:26 PM)big_dave Wrote: The number showing on the first screen is the pressure blowing at that moment. There's another pressure number that appears in the menus or in ResScan, together with AHI, leak rate, and time of use. That's the 95% pressure. The pressure is lower 95% of the time, and higher 5% of the time. ResScan also reports average pressure.

Thanks Big Dave!  That's very helpful information clearly explained.
Post Reply Post Reply
#4
RE: Resmed S8 Autoset Vantage Pressure results question
Hi D.D.,
WELCOME! to the forum.!
Good luck to you as you continue your CPAP therapy.
trish6hundred
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Question New CPAP User - Help Please - ResMed Airsense 11 Autoset Pawpri 26 491 2 hours ago
Last Post: Pawpri
Question [Diagnosis] Home Sleep Study Results & Feedback togapilot 6 535 03-26-2024, 02:36 PM
Last Post: togapilot
  Need help with Airsense 10 AutoSet JonUK 2 124 03-25-2024, 06:11 PM
Last Post: JonUK
  Can someone take a look at my OSCAR results? 3-4 weeks of CPAP & still improvements senseisaitama 5 133 03-24-2024, 10:43 PM
Last Post: Deborah K.
  ResMed S9 AutoSet and OSCAR - Help Appreciated Slippy 12 487 03-16-2024, 08:56 AM
Last Post: Slippy
  [CPAP] Please help me interpret my results baganaz 2 184 03-14-2024, 12:48 PM
Last Post: baganaz
  [CPAP] Persistant night waking - Oscar results help please philjones 0 160 03-07-2024, 05:39 PM
Last Post: philjones


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.