Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
[Equipment] Pressure sensor tubing for resmed vpap adapt sv
|
05-02-2014, 02:00 PM
Pressure sensor tubing for resmed vpap adapt sv
I just purchased a used ResMed VPAP Adapt SV because I have no insurance and it was a smokin' deal. I have done a sleep study and did have a script for one back when I did have insurance, so I know my pressure setting and thanks to this forum how to adjust it. Problem is when I got it home I realized it was missing the pressure sensor tubing and distal cuff that goes with it and as far as I can tell, the machine won't work without it. After doing some research I discovered that these two parts were going to cost me about $25 each. I was wondering if anyone out there has successfully tried using an oxygen titration adapter and oxygen tubing instead cause I can get those for about $3 each on ebay.
05-02-2014, 02:35 PM
RE: Pressure sensor tubing for resmed vpap adapt sv
I can't see any reason it wouldn't work. It's just providing a sample point close to the mask so it gets an accurate pressure sample. In fact if your mask has O2 injection port(s) you could hook the sample tubing there and it would work.
05-02-2014, 03:36 PM
RE: Pressure sensor tubing for resmed vpap adapt sv
Hi kcmair,
WELCOME! to the forum.! Hopefully, you are able to get your machine up and running. Hang in there for more suggestions, best of luck to you.
trish6hundred
RE: Pressure sensor tubing for resmed vpap adapt sv
(05-02-2014, 02:35 PM)Bama Rambler Wrote: In fact if your mask has O2 injection port(s) you could hook the sample tubing there and it would work. No such luck but I am going to give it a try with the adapter. I'll let you know how it turns out. (05-02-2014, 03:36 PM)trish6hundred Wrote: Hi kcmair, Thanks Trish! |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
drying out tubing with machine | sleepingbetterinFl | 4 | 248 |
04-20-2024, 05:08 PM Last Post: Phaleronic |
|
Resmed Airsense 10 time to return to low pressure setting | jfchap | 3 | 178 |
04-13-2024, 03:54 PM Last Post: SarcasticDave94 |
|
Aircurve 10 ST-A and Lumis 150 VPAP ST-A just a UK branding difference? | SingleH | 37 | 2,563 |
03-18-2024, 07:51 AM Last Post: SingleH |
|
Using cleaning brushes in heated tubing | TiredTom111 | 9 | 664 |
01-29-2024, 08:30 PM Last Post: TechieHippie |
|
ResMed AirSense 11 + ClimateLine 11 Heated Tubing + Oxygen | YankeeLaker | 2 | 406 |
01-22-2024, 08:17 PM Last Post: YankeeLaker |
|
Mold issue / cleaning CPAP (the unit, not tubing), Resmed S9 | NightOwl42 | 9 | 861 |
01-19-2024, 11:29 PM Last Post: NightOwl42 |
|
Oxyair tubing for Resmed AS11? | CactusJack2 | 2 | 443 |
12-25-2023, 05:44 PM Last Post: CactusJack2 |