Support Apnea Board & OSCAR  

Setting the clock

From Apnea Board Wiki
Jump to: navigation, search

The time on xPAP machines are usually set at the factory. Some can be reset to the local time but others cannot. Then there is, in most locations, the twice a year time change. This wiki page will discuss if setting the clock is possible and how to do it.

CPAP clinician setup manuals can be obtained for most common CPAP machines by going to Apnea Board's CPAP Clinician Manual Page. For further assistance, patients can post questions on the Apnea Board Forum.

Respironics

The time and date for a Respironics xPAP is set at the factory and cannot be changed by the user. The time is set to the Coordinated Universal Time (UTC). See the External Links section below to find out how to determine the time difference for your location.

Resmed

ResMed xPAP time and date can be changed by the user. It involves accessing the "Clinician" section of the settings.

Instructions for S9 series machines:

  1. Press the Setup button and the Push Dial (see first image below) for 3 seconds.
  2. Turn the Push Dial until you see the Options Screen (see second image below).
  3. Press the Push Dial once to select the Option Screen.
  4. Turn the Push Dial until TIME is highlighted in blue.
  5. Press the Push Dial once. The highlight should now be orange.
  6. Turn the Push Dial until the correct HOUR is displayed.
  7. Press the Push Dial once then turn dial to change MINUTES.
  8. Press the Push Dial once. The selection should change from orange to blue.
  9. The method is the same to change the date.
  10. When finished, turn the Push Dial until <<Home is selected. Press Push Dial once.
  11. Done!

S9-time01.jpg S9-time02.jpg


Instructions for A10 series machines:

(AirSense 10 and AirCurve 10 machines)

Always backup your data on the SD card before making changes!
Plug the machine in. The "dial" can be turned or pushed in the center. The button below the screen with the house icon is called the "home" button. To access the clinician menu, press the dial and the home buttons simultaneously for 3 seconds. The clinician menu will appear.

A10-set-time.jpg

Note: If you have already been using the machine, you must wait more than an hour after you have gotten up and turned off the machine before you try to set the clock back an hour. Setting the time back too soon will confuse the machine since it has already recorded data for that time period. For best results wait until later in the afternoon or evening to change the clock setting.

Instructions for Airsense 11 Autoset Machines:

This is a new model and some features have been changed. There is no longer a clock adjustment in the settings. Instead the machine uses your time zone offset from GMT (UTC). Depending on what part of the world you live in your time zone offset will either be a negative or positive number (-6, +5, etc.). This setting is meant to be done prior to the first time you use the machine.
If you are unsure what your time zone offset is, check the following website: https://www.timeanddate.com/time/map/

WARNING: Changing the time zone in your machine will erase all patient data! Always make a backup of your SD card data prior to changing any settings!

To change your time zone settings:
A11-set-time.png

For more information on changing the time setting please refer to this post:
http://www.apneaboard.com/forums/Thread-Airsense-11-Time-Zone-Change?pid=420819#pid420819


Others

F&P Icon

Fp-icon01.jpg


Instructions for setting the time on other machines will be added here.

Wiki Editor Request: If you know how to set the clock on a CPAP machine that we don't have listed here, please help us by emailing clock-setting instructions to apneaboard@gmail.com

External Links

Coordinated Universal Time (UTC) - http://en.wikipedia.org/wiki/UTC
Time.is - http://time.is/UTC
Time and Date - http://www.timeanddate.com/




Donate to Apnea Board