Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

BiLevel Help Spikes
#1
BiLevel Help Spikes
can someone look at my charts?
my breaths look very spiky to me. 
what can i do to round them out?
i had until now a resmed 11 and the breaths were not pointy like this.

thank you.


Attached Files Thumbnail(s)
           
Post Reply Post Reply
#2
RE: BiLevel Help Spikes
If you are on the same pressure (which I assume you are) my guess would be something to do with rise time. Do you know if you had a set rise time on your AirCurve 11, or if you had Easy-Breathe on? If you don't know what either of those things are I'll do a quick explanation, feel free to skip the next paragraph if you already do.

Rise time is essentially just the time it takes to go from your EPAP to your IPAP once your machine senses you breathe in. If you have a fairly low rise time at, say, 200 ms, the switch will be very quick. And if it's something higher, say 500 ms, it will obviously be much slower. If Easy Breathe is on, it disables the rise time setting, as it basically just automates that process. It's a ResMed based algorithm that adapts to your breathing rate to try to provide a smooth switch between your EPAP and IPAP. I'm pretty sure Lowenstein machines have some variation of Easy Breathe, but I don't know what it's called. Changing these settings can definitely affect the waveform of your breaths. 

If the slight flattening of the waveform isn't causing you to have arousals it shouldn't be a problem. Your flow rate graph looks pretty good for the most part to be honest. If it's something you really want to fix, raising your IPAP by 1 or 2 should smooth them out more. It would probably be more difficult to mess with your rise time if you aren't experienced with that, and even then it might not fix it. That's just my theory on what's causing the difference on presumably the same pressures.
Post Reply Post Reply
#3
RE: BiLevel Help Spikes
Thanks so much
Actually I had a resmed apap not a bilevel. But never had such high spikes with any settings on the apap.
Will raise the ipap and see what happens.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Flow Limits How to Upgrade CPAP to Bilevel Deborah K. 117 15,024 11-04-2024, 10:22 PM
Last Post: Deborah K.
  Switched from ASV to Bilevel, Odd Cheyne Stokes Respiration Patterns, Any Thoughts? LennySleeps 4 235 10-26-2024, 02:57 PM
Last Post: katbrat
  [Pressure] Recently diagnosed with UARS and prescribed Bilevel. Need help with settings. cloudwalker 7 688 09-29-2024, 07:25 PM
Last Post: Jlcdsc
  Bilevel self-titration for UARS ChickenTenders 11 887 09-26-2024, 12:33 PM
Last Post: ChickenTenders
  Tweaking Bilevel ahuman 25 1,575 09-10-2024, 12:36 PM
Last Post: ahuman
  Thinking of Taking a Break Until I Can Get Bilevel Idub88 31 1,329 09-08-2024, 07:33 PM
Last Post: PlayerTwo
Question Under 1 AHI (great!) but what’s with the constant spikes on my breathing chart graph? JustG 5 371 08-25-2024, 02:47 PM
Last Post: staceyburke


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.