Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

N30i sticks and then deforms
#1
N30i sticks and then deforms
Have not managed a full night with mask. Around 3am I wake up because the silicon cushion is sticking to my nose, which is sweating. Movement or trying to adjust it results in leaks that I can't fix. 
The first part of the night it's very comfortable. 
Do I have to remove it, wipe it and my nose down, wait for it to dry and then replace it on my head? Insomnia is a problem and if I just remove it I can get back to sleep.
Reducing humidity helped a little. Maybe I'll try going drier, though the moisture doesn't seem to be coming from the air.
Post Reply Post Reply
#2
RE: N30i sticks and then deforms
Padacheek on our "Supplier's List" link at the top of the page makes custom mask liners.  I have not checked, but they may make one for your particular mask. 

Also, Amazon, etc. sell many generic mask liners.  I have personally found them to decrease discomfort, and decrease leaks slightly by filling in any tiny gaps between the silicone and my face.

You could even try some material you have laying around cut out as best as possible in the mean time for a stop-gap.
Download OSCAR
OSCAR Chart Organization
Attaching Files


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.  
Post Reply Post Reply
#3
RE: N30i sticks and then deforms
Aw425, the problem may partly be related to the humidity. Have you tried setting the climate control to Auto or even off? Using the P30i may be a solution as well. I had to switch from the N30i to the P30i mainly because of leaks.
Post Reply Post Reply
#4
RE: N30i sticks and then deforms
Thanks.  I'll try reducing/eliminating the humidity and see what happens.

Jay51, I hadn't thought of a liner.  Don't see any that are specifically for the N30i, but I'll try fabricating something if humidity adjustments don't work.
Post Reply Post Reply
#5
RE: N30i sticks and then deforms
I too tried the N30i but it slid around and leaked. I switched to the P30i, which uses the same headgear, and the problem was solved. The pillows work way better than the sling.
Machine:  ResMed AirCurve 10 Vauto
Mask:  Bleep DreamPort Sleep Solution and F&P Nova Micro

Link to thread about switching from Autoset to Bilevel:
https://www.apneaboard.com/forums/Thread...+a+bilevel

Post Reply Post Reply
#6
RE: N30i sticks and then deforms
Deborah,
thanks much.  I finally received some pillows and they are so much better, for side sleeping and comfort.
The reason it took so long is that the company phone message said they are in Asheville and have lots of problems from the flood.  A week or so later they were back in business.
Post Reply Post Reply
#7
RE: N30i sticks and then deforms
I saw a YouTube that a new version of the n30i is coming at the end of the month.
Post Reply Post Reply
#8
RE: N30i sticks and then deforms
If you like it, I suggest you stick with the P30i.
Machine:  ResMed AirCurve 10 Vauto
Mask:  Bleep DreamPort Sleep Solution and F&P Nova Micro

Link to thread about switching from Autoset to Bilevel:
https://www.apneaboard.com/forums/Thread...+a+bilevel

Post Reply Post Reply
#9
RE: N30i sticks and then deforms
I have tried both masks, N30i, P30i, P30i is definitely the best. My recommendation would be the P30i mask. I have been using it for years.
Post Reply Post Reply
#10
RE: N30i sticks and then deforms
I was never able to get a good seal with the N30i. I changed to the P30i pillows which I have no issues with.

I usually switch between the P30i and my favorite, the P10.
OpalRose
Apnea Board Administrator
www.apneaboard.com

_______________________
OSCAR Chart Organization
How to Attach Images and Files.
OSCAR - The Guide
Soft Cervical Collar
Optimizing therapy
OSCAR supported machines
Mask Primer



INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE.  ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.  INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  What mask setting with AirMini and AirTouch N30i ConanOBrien 0 446 04-06-2025, 02:30 PM
Last Post: ConanOBrien
  N30i leakage alvaro212 14 4,029 02-22-2025, 02:27 PM
Last Post: LaurenceShaw
  How to Prevent N30i Nasal Pillow from Sliding Up During Use? Chase326 20 2,183 02-11-2025, 09:22 PM
Last Post: Chase326
  Investigating P30i / N30i black spots - anyone got a microscope? donsburg 0 416 01-11-2025, 04:54 AM
Last Post: donsburg
  Resmed AirTouch N31i vs. AirFit N30i comments please Papit 15 3,309 01-10-2025, 06:03 PM
Last Post: artsyuno
  n30i Airtouch nasal cushion artsyuno 0 588 12-25-2024, 12:38 PM
Last Post: artsyuno
  [Equipment] Cleaning ResMed AirFit P30i/N30i exhaust port asterisk 1 833 08-05-2024, 08:30 AM
Last Post: G. Szabo


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.