Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Need Help With Dream Station Power Supply
#1
Need Help With Dream Station Power Supply
Hi All, I think my power supply went bad to my dream station. I cannot get a voltage reading on the 12 volt end. Anyway I cracked open the power supply case and noticed there are 3 leads going to the 12 volt plug. I want to cut the plug off and hook it up to another generic 12 volt power supply I have, and need to know what the three wires are about and their polarity. 

I am guessing that the black is ground and the 2 white wires are  both12 volt? Does the heater have a separate 12 volt feed? It looks like that plug has 3 contacts.

Thanks in advance. 

           
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: Need Help With Dream Station Power Supply
If you decide it too much trouble, search Amazon for, "power supply for philips dreamstation". There are KFD brands for $25 or less. I have been using this brand on my Resmed devices with excellent results.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Need Help With Dream Station Power Supply
Thanks for the help, I have been searching on what I think is the model number and it is not real clear on which one. I know that it is 12v and it needs 7 amps but I am worried about the end plug. The plug looks to be 3 conductor in the one I have. I have amazon prime and free returns but I don't want to blow my cpap trying it out.

My model number from my cpap is dsx500t11c. I search on that number and this charger comes up, although there is no reference on the page of that number. Any tips here?  I posted an attachment of the page since I am prohibited from posting links yet.


[Image Containing a Commercial Website Name or URL Removed]


-----
Moderator Action: Image Containing a Commercial Website or URL Removed

To maintain our status as an educational organization, the only commercial images or links allowed in this forum are to CPAP-related manufacturer websites.  This is stated in the Apnea Board Rules with details given in the Commercial Links Policy section.

-----
Post Reply Post Reply
#4
RE: Need Help With Dream Station Power Supply
I sent my info to KFD and am waiting for a response.
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Battery Power Question??? Tennessee Cattleman 2 142 07-16-2021, 07:57 AM
Last Post: Tennessee Cattleman
  [Equipment] Help solving power issue (REMstar Auto A-Flex cycling off/on during use)) RhythmMachine 2 109 07-13-2021, 07:01 PM
Last Post: RhythmMachine
  Will this work for battery power for Resmed S9? Lanco 7 198 06-22-2021, 11:41 AM
Last Post: Nightynite
  Dream Station Filter Compatibility FifthAvenue 2 140 06-17-2021, 08:30 PM
Last Post: SarcasticDave94
  Dream Station 2 New firmware blizardj 0 157 06-12-2021, 08:04 PM
Last Post: blizardj
  Cautionary tale Dream Station 2 Ponydriver 26 1,474 06-07-2021, 12:27 PM
Last Post: xxxxqwe
  [Equipment] ResMed Power Converter Sleepster 3 235 05-10-2021, 07:41 PM
Last Post: SideSleeper


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.