Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

No CA or UA on SleepHead
#11
RE: No CA or UA on SleepHead
I have the A10 and I'm running SH v0.9.8.-1 openGL. In this version CSR is reported in event flags even though none are detected as long as the flag for CSR is turned on in the lower left corner of the screen under Flags.
Coffee

Happy Pappin'
Never Give In, Never Give Up




INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. 
Post Reply Post Reply
#12
RE: No CA or UA on SleepHead
Sonic,
Have you had any CSR's reported before? My CSR is turned on in both SH 0.9.8.1 and SH 1.0 and is not displayed. That's why I'm guessing it only appears if you have or had an event.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#13
RE: No CA or UA on SleepHead
(10-27-2017, 08:16 AM)Walla Walla Wrote: I know this is the case with the Dreamstation PB will only show up in the events chart if detected.

Probably the same for ResMed.

I also have a Dreamstation (on loan) and VS (vibratory snore) shows up in Event Flags and I've never had one detected. I had a single VS2 detected however so maybe both display if one is detected?  Also, with the Airsense 10 i just had a night with no events detected yet all fields are still displayed.  Is it possible that once an event is detected, it turns on the Flag and keeps it on going forwards but not before the first event is detected?  Seems i should be able to over ride that manually but don't know.  What i'm trying to confirm here is if PB or CSR is not showing up, that it means I'm not having these as apposed to there being a problem with the device or with SH that is preventing detection or display of the event.  Without seeing an event flag, i don't know how i can be sure.
Post Reply Post Reply
#14
RE: No CA or UA on SleepHead
Yes, one night, 2 and 1/2 years ago, 10 days after starting therapy. Never again to my knowledge.
Coffee

Happy Pappin'
Never Give In, Never Give Up




INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. 
Post Reply Post Reply
#15
RE: No CA or UA on SleepHead
I just went back and looked at my beginning charts on ResMed. The charts show events for the first time after they happen.
Example. No line on chart for CA's the first night. Second night had a CA and line for CA's showed up on the chart after that.
Download SleepyHead
Organize your Sleepyhead Charts
Posting Charts
Beginner's Guide to SleepyHead
Mask Primer
5
Advisory Members serve as an "Advisory Committee" to help shape Apnea Board's rules & policies.

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.



Post Reply Post Reply
#16
RE: No CA or UA on SleepHead
[attachment=3936 Wrote:Crimson Nape pid='229486' dateline='1509108988']Some events will not display unless you need them. I know this applies when using and not using a pulse-ox device.  Maybe you need to have CSR events before the CSR label and flag will display.   Thinking-about

What you say sounds very plausible.  My SH is ver 1.0.0-beta.  I have not had a CSR showing up with either machine and the field is checked but not displayed.  I have seen instances that look like they could be CSR (two are attached).  The Dreamstation displays the PB Flag and the first night i used it, it did detect 1% PB so maybe that’s why it shows up with the Dreamstation only. 
Can anyone say if the attached flow rate should trigger either a CSR or PB event?  Looks like it to me unless maybe it needs to persist for a longer time?  Also why is the dead space between breathing not detected as an apnea (CA or OA).  These are clearly more than 10 seconds!!!
[attachment=3936][attachment=3935]
Post Reply Post Reply
#17
RE: No CA or UA on SleepHead
(10-27-2017, 11:20 AM)Walla Walla Wrote: I just went back and looked at my beginning charts on ResMed. The charts show events for the first time after they happen.
Example. No line on chart for CA's the first night. Second night had a CA and line for CA's showed up on the chart after that.
Sure looks like that's what's going on.  Thanks for checking!!
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Difference in reporting useage in Oscar from Sleephead biyahero 32 3,433 07-24-2019, 03:04 PM
Last Post: biyahero
  SleepHead CPAP overlay events useful freetime 0 1,101 12-21-2017, 12:58 PM
Last Post: freetime
  Wrong Times on SleepHead Graphs upsman 5 1,551 10-06-2017, 07:34 PM
Last Post: upsman
  Sleephead Tries to write to My SD card cmccarter 6 2,083 04-06-2017, 10:41 PM
Last Post: Squirrel
Question Automatic SleepHead Data Import DrNefario 9 2,286 02-21-2017, 08:25 AM
Last Post: Newbee2016
  Sleephead Software and Wireless Uploads RESTMD 3 1,801 10-16-2016, 05:13 PM
Last Post: srlevine1
  old version of sleephead download car54 4 1,773 09-26-2016, 01:31 PM
Last Post: Crimson Nape


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.