Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[split] FYSETC SD Wifi - Possible FlashAir Replacement
#41
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
The code was written with Linux and OSX in mind because it looks for and strips out any CR (0x0D) characters.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#42
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
Sorry for this question, but, in normal use, does one ever have to change the position of the switch?  Does it stay in CARDREADER mode "forever"?

I was trying to prototype use, (without using my CPAP) but my card reader is too smart apparently.  I tried to plug the card reader into a charging only usb port on my usb hub.  Unfortunately the FYSETC card isn't powered that way.  The card reader housing has power, but not the FYSETC card.  No flashing light, no comms, no ping.  Can't plug the FYSETC in to my CPAP directly - still waiting for the SD card extension cable to show up.

What a frustrating experience.  Now I can't attach to the dav.  I can ping the ip address, but it insists it is Not a WebDAV enabled share.  Right now it is in CARDREADER setting and plugged into the card reader.  The card is mounted. Do I have to throw the switch?  As one can clearly tell, I'm confused about the silly switch... Huh
Post Reply Post Reply
#43
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
(03-21-2021, 04:06 PM)Crimson Nape Wrote: .....
Arie:
It sounds like you aren't connected via a USB connection.  When it's connected it will act like a serial port.  

Before connecting with the Arduino IDE, try connecting to the card using the USB port.  Just make sure the switch is in the USB2UART position.   You don't need a micro SD inserted to do this.

There is an unknown USB device indeed:
[attachment=30975]

Don't know what driver is needed...
Arie KLERK: Member of the Dutch Apnea Association staff (https://apneuvereniging.nl) and proud to be the OSCAR Translations Team Coordinator. 
***Please help us: We’re always looking for more translators and language editors***

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients, but just dedication to AB. 
Post Reply Post Reply
#44
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
Arie, in linux it reports as ch341-uart converter, it is a USB to serial converter.  Hope that is a clue.  Driver might be called CH341SER.EXE, or something like that, but please check, I'm no longer an active Windows user.  I did find a driver by that name, but please get it from a trust-able source!

Once you get the driver installed, set up the serial parameters in putty and send the "M" commands.
Post Reply Post Reply
#45
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
Arie - 2 things come to mind.  Make sure you are using a fully wired USB cable.    The second is, you might have conflicting drivers.  I found the following that may help in this area.
https://github.com/adrianmihalko/ch340g-...s-x-driver
At the bottom it discusses on how to address the conflict problem.

-Red
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#46
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
Tks, Red. I found a driver already and tried to flash. That gave an error:
[attachment=30977]
So, I presume I have not flashed the card.

Then I connected by PUTTY, with success! I have set the SSID and PW, and was confirmed it is on 192.168.2.79.

But from then I stalled:
  1. I set the slider to CARDREADER
  2. I pushed it into my AS10 (modified), it was recognized
  3. But not visible on my network, no ping...
Should I have saved the settings someway?
Arie KLERK: Member of the Dutch Apnea Association staff (https://apneuvereniging.nl) and proud to be the OSCAR Translations Team Coordinator. 
***Please help us: We’re always looking for more translators and language editors***

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients, but just dedication to AB. 
Post Reply Post Reply
#47
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
The missing sdfat library was covered in step #6 in this post, http://www.apneaboard.com/forums/Thread-...#pid388125.  

Since your DHCP server/router issued that address, unless you reserved that IP in your server, it could be assigning another IP when plugged into the CPAP.  If the card is flashing while in the CPAP, I would look at DHCP leases in your router for its IP.  Also, make sure that you placed the selector switch in the CARDREADER position.


You do realize that you are following the instructions of an idiot?  (me!)  Big Grin
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#48
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
Huhsign  If you are an idiot, what would you call me, learning from you?
               Banana Banana Banana Banana Banana Banana Banana Banana Banana Banana
Arie KLERK: Member of the Dutch Apnea Association staff (https://apneuvereniging.nl) and proud to be the OSCAR Translations Team Coordinator. 
***Please help us: We’re always looking for more translators and language editors***

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients, but just dedication to AB. 
Post Reply Post Reply
#49
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
Here are some tidbits of information...
The "ip.gcode" file that it writes to the SD card lists the assigned IP with a M117 prefix. Wherever this code got hacked from, I'm guessing that M117 was the IP assignment command. M117 isn't anywhere in the code now. Also, the "ip.gcode" file is never read for any purpose. The only good thing about this file is if you are using the DHCP to acquire an address, you can see what IP was assigned.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#50
RE: [split] FYSETC SD Wifi - Possible FlashAir Replacement
Code update:
I have modified the code to add or address the following:
  • Allowed for the SETUP.INI file name to be opened and read if it happens to be in all lowercase.
  • Added an "IP" assignment parameter to the SETUP.INI file. Now, there are 3 parameters in the SETUP.INI file.
    • SSID
    • PASSWORD
    • IP
  • Allowed for the use of the above parameters to work if they are declared in lowercase.
  • I did not provide for the setting of the gateway, DNS, and subnet mask parameters because this device operates in a local environment and has no need for the first two parameters.  The subnet mask defaults to a "255,255,255,0" setting, making it one less thing for someone to screw-up.
  • Modified the "M" command parse, so it will recognize a lowercase "m" as being the same.
  • Renamed the "ip.gcode" file name to "ip_address.txt". It still does nothing.... but it is still good for "who am I?".
  • Changed the name, Marlin, to ESP8285 when it is outputting diagnostic info.  (Marlin is a 3D firmware supplier)
  • Added an "M49" to assign an IP.  Just because I could. Big Grin

I will make this code available if anyone would like a copy.

Sleep-well
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [split] OSCAR v1.5.2 is Install Problems millerdq 1 56 Yesterday, 03:29 PM
Last Post: LoudSnorer
  [EzShare SDcard wifi] Script to autodownload biorn 186 24,903 03-26-2024, 10:50 PM
Last Post: PappaJoe
  Flashair - Dreamstation -> Airsense 11 Autoset todivefor 14 668 02-28-2024, 07:22 PM
Last Post: Crimson Nape
  WiFi SD Card for AirSense and OSCAR Stillglade 1 643 01-08-2024, 03:00 PM
Last Post: Crimson Nape
  Created a program to support Wifi SD card for Resmed and all other devices narual 13 2,252 12-08-2023, 07:29 PM
Last Post: JerryE
  FlashPAP - FlashAir WiFi SD card utility TiredToo 296 94,950 10-05-2023, 06:54 AM
Last Post: olddog27
  wifi EzShare SD Card for Windows 11 Home Greg1582378 3 834 09-23-2023, 03:47 PM
Last Post: Crimson Nape


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.