+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Help with REM star m series (/Thread-Help-with-REM-star-m-series)
Help with REM star m series - rogertaurau - 10-31-2017
I have a REM star m series would like to know if there is way to collect reading off this machine it has no card setup in the machine.
RE: Help with REM star m series - Sleeprider - 10-31-2017
The Remstar Auto M-Series and Pro M-Series and all BiPAPs used a credit card sized SmartCard to record data. This card had to be read with a MAKO DT 3500 smartcard reader, and imported using a serial cable to a PC where the data was read by Encore software.
The practical answer to your question is that it would be too costly to set this machine up to produce data (assuming it is not the basic CPAP SE); however the cards, reader and software are available. What is preventing you from upgrading to a modern new machine? I too used the M-Series, but it is 3 models old and has not been made for 9 years.
RE: Help with REM star m series - trish6hundred - 11-03-2017
Hi rogertaurau,
WELCOME! to the forum.!
The M series is an older machine, if you can, you should look into a newer one.
Good luck with CPAP therapy.