Apnea Board Forum - CPAP | Sleep Apnea
ClimateLine Quick Connect with Dreamwear mask - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: ClimateLine Quick Connect with Dreamwear mask (/Thread-ClimateLine-Quick-Connect-with-Dreamwear-mask)



ClimateLine Quick Connect with Dreamwear mask - tomdid - 11-21-2020

I just got my new CPAP and I'm using the ClimateLine tube with my ResMed Airsense 10 Autoset. The quick connect adapter that came with the Philips DreamWear mask doesnt seem to go all the way into the end of the tube and im getting some leaking. it doesnt seem liek im getting bad readings with the seal, but im not sure if this is normal.

I just want to make sure I have it set up correctly.

Any suggestions?


RE: ClimateLine Quick Connect with Dreamwear mask - staceyburke - 11-22-2020

If you take the white part off the quick connect it will fit.


RE: ClimateLine Quick Connect with Dreamwear mask - tomdid - 11-22-2020

The whole quick connect is 1 piece, and its all white. Im not sure what part you mean?


RE: ClimateLine Quick Connect with Dreamwear mask - Crimson Nape - 11-22-2020

If you had a prior mask, it may have left a bushing inserted in the hose end. The inside of the hose should feel like its outside, soft. If it feels like hard plastic then it is a bushing.


RE: ClimateLine Quick Connect with Dreamwear mask - tomdid - 11-22-2020

This is my first mask, nothing that I know of was in the tube before I put the quick connect thing in.

Is it normal to have some leakage where the mask connects to the tube?


RE: ClimateLine Quick Connect with Dreamwear mask - staceyburke - 11-22-2020

Make sure the white part was not left in the hose when you tried to put the new mask onto the hose. If you did remove the old one or did not have one already in, take the white price off the mask and insert it into the hose without the mask attached. Once you have it fully on connect the mask.