+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: OSCAR Daily Report Print Layout problem (/Thread-OSCAR-Daily-Report-Print-Layout-problem)
OSCAR Daily Report Print Layout problem - HiTechHiTouch - 03-12-2021
There are 3 sessions available. A time region that includes the last two sessions is selected. Event Flags, Resp Rate, Mask Pressure, Flow Rate, Leak Rate, Flow Limit, Tidal Volume, Minute Vent, Insp. Time and Exp. Time charts are selected.
A screen print of what I was viewing (hopefully the same, but I had to reopen Oscar) is attached.
[attachment=30745]
Edit/Print Report command is executed.
The output is two pages, attached, from my scanner.
[attachment=30740] [attachment=30741]
Problems:
1. Two Flow Rate charts occur. The first is for the entire day, and is not wanted. It doesn't show on the screen print. The second (at the top of page 2) is the current selection, shows on the screen, and was expected to print.
2. The Exp. Time chart should appear at the end (on page 3 prn). It looks like the extra Flow Rate may have pushed it off the printout.
I'll gladly e-mail you the ResMed data behind the report if you need it to try and reproduce the problem.
RE: OSCAR Daily Report Print Layout problem - Crimson Nape - 03-12-2021
Your scanned images are unreadable. The scanner is set to B/W. It needs to be at least grayscale, if not set to color.
RE: OSCAR Daily Report Print Layout problem - HiTechHiTouch - 03-12-2021
Shucks. I mess up the attachments and the administrator won't let me fix them. Fortunately, the bad ones don't take up too much space.
Here are the corrected versions (i.e. enough resolution to be readable).
[attachment=30746] [attachment=30747]
RE: OSCAR Daily Report Print Layout problem - Crimson Nape - 03-12-2021
If you haven't deleted the first scanned images, you can do so by going to your UserCP (upper right of the webpage or http://www.apneaboard.com/forums/usercp.php) and go to the Miscellaneous → Manage Attachments (lower left). Place a check mark in the box on the right of the attachments you wish to delete. Scroll to the bottom and select, Delete Selected Items.
RE: OSCAR Daily Report Print Layout problem - HiTechHiTouch - 03-19-2021
Just for the record, Print Layout seems to have real problems if you change font sizes, y axis scaling, etc. I don't know how QT affects things, but the size and relative position of things are off by inches.
I'd like to get a copy of my screen done in scalable fonts. The imbedded photo image in the .png files is nothing but course dots.
I've tried using "Print Report" hoping for get a output file with fonts (.png, .pdf) but the OSCAR output seems a bit map.
My screen is "4K" and my HP LaserJet is set to 1200dpi, but the printed page looks extremely course with bad anti-aliasing. Poor AA is visible in a few places on the screen, but the screen is beautify compared to printed paper.
For example, the bottom line of several check boxes is missing. The upright left line of "M" and "N" are often missing or dotted. Plotted lines have short breaks in them.
I mention this just for the record. Give it a -99 priority.
RE: OSCAR Daily Report Print Layout problem - HiTechHiTouch - 03-19-2021
I might add that Print Report does seem to use scalable fonts, unlike the screen prints. But my page layout is far too messed up to be usable after I change sizes, etc.