Resmed Aircurve 10 SD card is almost full - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: Resmed Aircurve 10 SD card is almost full (/Thread-Resmed-Aircurve-10-SD-card-is-almost-full) |
Resmed Aircurve 10 SD card is almost full - Eugene1 - 04-17-2021 Hello, I have been using a Resmed aircurve 10 machine for more than 2 years. It came with a 4GB SD card and I noticed it has only 230 MB left. Do I need to buy a new card to replace it? what type of SD card I can use? I use OSCSR to analyze the sleep data. Thank you, Eugene RE: Resmed Aircurve 10 SD card is almost full - Crimson Nape - 04-17-2021 Create a directory on your PC and copy the SD card's contents to the new directory. Format the SD card, and it will be like is brand new. It will set up the required files when you insert it back into the CPAP. RE: Resmed Aircurve 10 SD card is almost full - Eugene1 - 04-17-2021 Thank you so much for your quick reply. I will just do that. RE: Resmed Aircurve 10 SD card is almost full - pholynyk - 04-18-2021 Further to that advice - It has been discovered that when the SD card gets full, the ResMed CPAP will erase the card and start over. OSCAR only backup up the data files it uses, so it is important to back up the whole card if you want a complete record. RE: Resmed Aircurve 10 SD card is almost full - Eugene1 - 04-18-2021 Thank you for your comments. I was able to follow Crimson Nape's advice and transferred files. I checked this morning, the newly formatted card is working and I was able to see last night's recording. |