+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [CPAP] problem with the machine (/Thread-CPAP-problem-with-the-machine)
problem with the machine - niro - 08-29-2023
I bought a new machine and I have a problem and I would appreciate your help
I noticed that in the morning after I stop the operation of the machine, there is a light that flashes cold. And the machine puts out air at a very low pressure
[color=rgba(0, 0, 0, 0.87)]שמירת התרגום[/color]
[color=rgba(0, 0, 0, 0.87)]Do I have a problem with the machine?[/color]
RE: problem with the machine - Crimson Nape - 08-29-2023
No. Since you use the humidifier, this is a dry-out step designed into the CPAP's software.
- Red
RE: problem with the machine - niro - 08-29-2023
but i dont use humidifier
RE: problem with the machine - Crimson Nape - 08-29-2023
You may not use it, but it would appear you have it set to anything but "Off".
-- Red
RE: problem with the machine - niro - 08-29-2023
how can i do it ?
the humidifier not connect
RE: problem with the machine - staceyburke - 08-29-2023
Each type of machine is different. You have unsure for the make of your machine. His answer is for a Resmed model 10 or 11. There are machine manuals free download at the top of the site.
RE: problem with the machine - Sleeprider - 08-29-2023
The snowflake symbol is a "cool-down" mode. Maybe your machine uses it to cool the motor? I don't even know what device you are using.
RE: problem with the machine - OpalRose - 08-29-2023
Here's his previous thread:
https://www.apneaboard.com/forums/Thread-CPAP-BUY-resmed-11?pid=484461#pid484461
Looks like an AirSense 11 Auto.
niro,
Please update your profile so that folk know what machine, pressures, etc. you are using.
https://www.apneaboard.com/forums/usercp.php?action=profile
RE: problem with the machine - niro - 08-30-2023
resmed s11
RE: problem with the machine - OpalRose - 08-30-2023
(08-29-2023, 11:29 AM)niro Wrote: I noticed that in the morning after I stop the operation of the machine, there is a light that flashes cold. And the machine puts out air at a very low pressure
To answer your original question... this is normal. When you stop your machine, you will notice a flashing snowflake symbol (on the A10, not sure what the A11 shows).
It's called the cool down mode, and will blow a very low amount of air through the hose.
It usually doesn't last too long.