I have the machine set to start when I put on the mask. I change the air filter every 30 days and all of the insides that I can inspect look clean. Any ideas would be appreciated.
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Continous Air Flow with mask removed
|
01-27-2020, 10:44 AM
Continous Air Flow with mask removed
My machine continues to blow air at full force after I remove my mask. The flow would stop after maybe 10 seconds in the past but now the only way to stop the flow is to turn the machine off.
I have the machine set to start when I put on the mask. I change the air filter every 30 days and all of the insides that I can inspect look clean. Any ideas would be appreciated.
01-27-2020, 11:01 AM
RE: Continous Air Flow with mask removed
Verify Smartstart is on and your machine starts by detecting breathing. When removing your mask, if the machine does not shut-down, try removing the hose from the mask to create a fully open circuit. If the machine will not shut down with air flowing directly from the tube, it may be a malfunction in the machine sensors, and you will either have to manually control the machine or discuss repair with your supplier.
Sleeprider
Apnea Board Moderator www.ApneaBoard.com ____________________________________________ Download OSCAR Software Soft Cervical Collar Optimizing Therapy Organize your OSCAR Charts Attaching Files Mask Primer How To Deal With Equipment Supplier INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
01-27-2020, 06:19 PM
RE: Continous Air Flow with mask removed
Smartstart was on so I turned it off, ran the machine with the power switch, turned Smartstart back on and it worked three times. Will see if it continues. Thanks for the help.
01-27-2020, 07:05 PM
RE: Continous Air Flow with mask removed
Of course! Aside from my hammer, my favorite tool is to turn it off and turn it back on. I should have been on top of this one.
Sleeprider
Apnea Board Moderator www.ApneaBoard.com ____________________________________________ Download OSCAR Software Soft Cervical Collar Optimizing Therapy Organize your OSCAR Charts Attaching Files Mask Primer How To Deal With Equipment Supplier INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
02-11-2020, 03:10 PM
RE: Continous Air Flow with mask removed
Gotta love it when things still work.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
02-11-2020, 08:38 PM
RE: Continous Air Flow with mask removed
I don't use smartstart since I don't want my APAP starting while I am still adjusting my headset/mask.
Just before getting into bed, I connect the hose to the mask. When I am in bed, I reach over an push the "on" button on top of my ResMed AirSense 10 Autoset. Then it is goodnight to the world. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Too much STATIC showing in OSCAR Flow Rate | PappaJoe | 12 | 332 |
20 minutes ago Last Post: PappaJoe |
|
Flow rate on Oscar shows no data for my minute and a half at a time | Sleepwarrior12345 | 2 | 91 |
10 hours ago Last Post: Sleepwarrior12345 |
|
Low AHI vs. low Flow Limitation | apneakid | 15 | 1,071 |
Today, 08:08 AM Last Post: Sleeprider |
|
Flow Rate Forms | erolalper | 2 | 84 |
Yesterday, 09:36 AM Last Post: erolalper |
|
Flow Rate and Flow Limit Graphs | ovmeadows | 20 | 2,894 |
Yesterday, 08:37 AM Last Post: Sleeprider |
|
Flow Limits How to Upgrade CPAP to Bilevel | Deborah K. | 110 | 9,132 |
Yesterday, 07:31 AM Last Post: SeePak |
|
flow limit of 1 | rhishi | 3 | 138 |
04-25-2024, 11:04 PM Last Post: rhishi |